784763
22
Zoom out
Zoom in
Previous page
1/28
Next page
Manufactured under one or more of these patents.
U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052, 6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614,
Australian patent: 2373248 other patents both foreign and domesc applied for and pending. All material copyright of Balboa Water Group.
42281_A | Compable with SpaTouch 1 & 2 22 03.17
Utilities
GFCI Test Feature
CE Product
Reset Button:
Forcing the GFCI Trip Test
(North America Only)
Warning:
The Ground Fault Circuit Interrupter (GFCI) or Residual
Current Detector(RCD) is an important safety device and is
required equipment on a hot tub installation.
(The GFCI Test Feature is not available on CE rated systems).
Used for verifying a proper installaon
Your spa may be equipped with a GFCI Protection feature. If
your spa has this feature enabled by the manufacturer, the
GFCI Trip Test must occur to allow proper spa function.
On some systems:
On those systems that automatically test the GFCI within 1 to
7 days after startup:
The end-user must be trained to expect this one-time test
to occur. The end-user must be trained how to properly
reset the GFCI. If freezing conditions exist, the GFCI or RCD
should be reset immediately or spa damage could result.
CE registered systems do not have an RCD Test Feature due
to the nature of the electrical service. Some UL registered
systems do not have the GFCI Test Feature activated. The
end-user must be trained how to properly test and reset
the RCD.
Only use the Reset Button prior to moving the spa to a new
location. Pressing the Reset the button forces a new Test to
be performed at the new location.
The installer can cause the GFCI Trip Test to occur sooner by
pressing Test on the GFCI Test screen.
The GFCI should trip within several seconds and the spa
should shut down. If it does not, shut down the power and
manually verify that a GFCI breaker is installed and that the
circuit and spa are wired correctly. Verify the function of
the GFCI with its own test button. Restore power to the spa
and repeat the GFCI Trip Test.
Once the GFCI is tripped by the test, reset the GFCI and the
spa will operate normally from that point. You can verify a
successful test by navigating to the above screen. “Passed”
should appear after the Reset line is selected on the GFCI
screen.
Within 1 to 7 days after startup, the spa will trip the GFCI to
test it. (The number of days is factory programmed.) The GFCI
must be reset once it has tripped. After passing the GFCI Trip
Test, any subsequent GFCI trips will indicate a ground fault or
other unsafe condition and the power to the spa must be shut
off until a service person can correct the problem.
Touching the GFCI Test Icon on the Utilities Screen takes
you to the GFCI Test screen..
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Balboa SpaTouch2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Balboa SpaTouch2 in the language / languages: English as an attachment in your email.

The manual is 2.12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info