Manual Babymoov Expert II (page 10 of 36) (English, German, Dutch, French, Italian, Portuguese, Spanish)

496289

Zoom out

Zoom in

1/36

BABYPHONE EXPERT II • Instruction Manual

1. e. Using the Up/Down button (9), set the upper temperature limit above which the

unit will provide a temperature alarm. Each press of the button will cause the

temperature to advance or retreat one step. Press and hold the Up or Down button

(9) will cause the temperature to scroll up or down rapidly. The allowed selectable

temperature range is - 3°C to + 49°C. In case OFF is selected, no upper

temperature limit is set. Confirm your selection by pressing the mode button (10).

The LCD will show the following:

1. f. Using the Up/Down button (9), set the lower temperature limit below which the unit will provide a

temperature alarm. The allowed selectable temperature range is - 8°C to + 44°C. In case you have

made an illogical entry (e.g. you select 15°C as upper limit and 23°C as lower limit), the unit will not

accept your entry and will sound two beep tone. In case OFF is selected, no lower temperature limit

is set. Confirm your selection by pressing the mode button (10). The LCD will show the following:

Not yet receive temperature

reading from transmitter

Temperature reading

signal received

N.B. It is recommended to have at least ±5°C between the settings of upper and lower temperature limit

from the current temperature reading, otherwise the temperature alarm can often be heard whenever

the baby’s room temperature changes slightly.

2. A momentarily press of the mode button (10) will cause the LCD screen to show the different settings

in a cyclic order:

Lower temperature limit is set at 16°C

Upper temperature limit is set at 29°C

Current baby's room temperature is 23°C

CH2 and digital code 28 is selected

2. A screen showing the channel/digital code ; the out-of-range alert setting ; the upper temperature limit

setting or the lower temperature limit setting will automatically return to screen showing the baby’s

room temperature after 5 seconds if no further button is pressed.

3. Place the receiver at a reasonable distance away from the transmitter to avoid feedback. Too close a

distance will create a screeching sound at the speaker (12).

4. Once the unit receives a signal from the transmitter, the LCD will become backlighted and LEDs in the

level meter (11) will light up. The louder the baby’s voice, the more number of LED will be lighted up.

This feature is useful in case the parents prefer to turn down the speaker volume to keep the

environment quiet.

5. The speaker volume can be adjusted using the Up/Down button (9). The volume bar graph in the LCD

will also change correspondingly. More segment of bar graph shown means higher volume from

speaker (12). When no segment is shown on the LCD, the speaker (12) is totally muted.

6. This unit is equipped with a vibrating alert. Set the power ON/OFF switch (8) to position, the vibration

icon will also show up in the LCD. Once the received baby’s voice is loud enough, the vibrator starts

functioning. This feature is useful when the parent is working under very noisy environment (e.g.

Vacuum cleaning). To save battery power, it is recommended not to use the vibrating alert frequently.

7. When the out-of-range alert function is set to On in both transmitter and receiver, once the receiver is

beyond the communication range of the transmitter for over 2 minutes, an out-of-range alarm will be

heard. The LED level meter starts flashing together with the out-of-range icon to alert the parents.

Besides, the temperature reading will show - -°C . The alarm and icon will go off only when the receiver

falls back within the communication range of transmitter.

N.B. This alarm will also be heard in case the transmitter is switched off, or its battery has run down, or

its power is cut off, or the channel/digital code setting is different between the transmitter and receiver,

or the out-of-range alert setting is different between transmitter and receiver.

8. Whenever the baby’s room temperature falls outside the range as preset by the upper and lower

temperature limits, an alarm will be heard. Depending on whether the upper or lower limit is

exceeded, the correspondingly icon and the current temperature reading start flashing in the LCD.

9. The condition of the rechargeable battery pack is shown by the battery status indicator . When the

battery power is being consumed, the segments within the battery status indicator gradually falls.

Once the indicator becomes empty, its starts flashing and an alarm will be heard, reminding the

parents to charge up the battery using the rapid charger. When the receiver is switched on and placed

in the rapid charger, the segments within the battery status indicator will flash in turn while battery is

being charged. Once charging is completed, the flashing will stop and all three segments show steady

up indicating the battery is full.

10. When only one segment is left within its battery status indicator, the transmitter will send out a signal

to the receiver. The transmitter low battery icon will start flashing in the receiver’s LCD and a beep

tone alarm will be heard. Once the transmitter battery status indicator becomes totally empty, two

beep tones will be heard, urging the parent to replace with new battery for the transmitter.

11. Each time a button is pressed, a beep tone will be heard to validate your entry being recognized by

the unit.

12. The loudness of the alarm and beep tone is fixed and independent from adjustment of the

speaker volume.

Both the receiver and transmitter can be carried around using the belt clip. To remove the clip, follow

diagram as shown.

BBPhone Expert II-Notice 5/12/06 11:41 Page 19

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Expert II in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 2,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Babymoov Expert II Manual

Product: