496281
9
Zoom out
Zoom in
Previous page
1/36
Next page
7. Turn the control button . Then press the "On/Off"
button .
8. The indicator lamp lights up and the bottle heating cycle
starts. Warning: during the heating cycle steam will come
out of the opening on the hood. Keep your hands well away
to avoid getting scalded.
9. When the heating cycle has finished, there will be a beep
to tell you the bottle is ready. The appliance stops
automatically. Note: you can stop the heating cycle at any
time by pressing once on the "On/Off" button .
10. Remove the hood using the top handle. Warning:
the hood
gets very hot. Handle with care.
11. Remove the bottle immediately to avoid further heating by
the hot appliance. The bottle may be very hot, wait for it to
cool before handling. Warning: always shake the bottle
and check the temperature before giving it to your baby.
NOTE :
The bottles are heated by the steam heating the liquid in
them. The size, materials (glass or plastic) and quantity of
liquid will affect the final temperature of the contents. If the
bottles/jars are not hot enough, put a little more water in
the measuring tube. If the bottles/jars are too hot, reduce
the quantity of liquid in the measuring tube. Avoid leaving
the bottle in the tank when the heating cycle is over. The heat
remaining in the appliance will continue heating the bottle.
Leave the appliance to cool for at least 15 MINUTES between
each use.
Sterilizing a bottle:
1. Check that the appliance's voltage rating is the same as
that of the mains power supply. If so, you can safely connect
the appliance.
2. Remove the cooking juices container, the cooking basket and
the hood from the appliance.
3. Leave the insulation plate in the bottom of the tank.
4. Remove the mixing bowl and fill it with 90ml water.
5. Pour the water into the bottom of the tank.
6. Place the clean bottle (with no traces of milk in it) upside down
in the bottom of the tank. Put the retaining ring and teat in
the tank beside the bottle.
7. Replace the hood.
8. Turn the control button to the position. Press the "On/Off"
button .
9. The lamp lights up and the sterilization cycle starts. Warning:
during the heating cycle steam will come out of the opening
on the hood. Keep your hands well away to avoid getting
scalded.
10. When the sterilization cycle has finished, there will be a
beep to tell you the bottle is ready, and the appliance stops
automatically. Note: you can stop the sterilizing cycle at
any time by pressing once on the "On/Off" button.
11. Remove the hood using the top handle. Warning:
the hood
gets very hot. Handle with care.
12. You can now take out the sterilized bottle and accessories.
Warning: the bottle is hot.
Cleaning your Bébédélice:
- Always unplug your Bébédélice and make sure it is cold
before cleaning it.
- Bébédélice tank: wipe the heating element in the bottom of
the tank with a damp cloth or sponge. Use nothing but clean
water. Leave to dry. Do not immerse the Bébédélice in water
or any other liquid. Do not wash the Bébélice under running
water. Do not use any cleaning product, just water.
- The measuring tube, container, insulation plate, hood, blades
and mixing lid can be cleaned with a sponge, hot water and
a little mild liquid detergent. Rinse with water and leave to dry.
they can also be placed in the dishwasher.
- Never use any abrasive produces or cleaning solvents to
clean the appliance. They may damage the appliance and
its surfaces.
9
EN
Bébédélice
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Babymoov Bebedelice at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Babymoov Bebedelice in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info