Manual BaByliss E940XE (page 10 of 71) (All languages)

547094

Zoom out

Zoom in

1/71

for you. Special care should be

taken when cutting hair in these

areas to prevent injury.

• Remove any jewels like earrings,

necklaces, etc.

• Use your Easy Cut clipper

on clean, dry and carefully

untangled hair for best cutting

results.

• If your hair is long, cut it rst

using the scissors and comb.

• Make sure the unit is suciently

charged, or plugged into the

mains.

CUTTING AND MAINTAINING

SHORT HAIR CUTS

• Turn the Easy Cut clipper using

the ON/OFF switch located on

the top of the unit. The blades

will start to move and the green

LED will come on.

• Move the clipper slowly and

smoothly around the scalp

beginning at the top of your

head.

• The clipper can be used in any

direction to cut your hair, but use

gentle pressure. If you feel the

unit resisting, turn it o, empty*

any hair that may have collected

in the clipper and start clipping

your hair again.

*Hair will collect inside the blade

ring and you may need to empty

it before you nish cutting your

hair. In this case, switch the clipper

o and remove the hair by gently

tapping on the top of the clipper

and using the cleaning brush.

• If using on zones where there

are folds of skin, pull the skin

taut with your other hand before

continuing to cut.

• If you would like a grade 0 cut,

the clipper can be used without

a comb guide attached.

CLEANING AND MAINTAINING

THE EASY CUT CLIPPER

To ensure optimum performance

of your clipper, we recommend

cleaning the clipper after every

use.

• Remove the comb guide, rinse

under running water and dry it

thoroughly before storing.

• Never place the clipper under

running water.

• Using the cleaning brush,

thoroughly clean all hair from

the inside of the blade ring.

• Before each use, we recommend

adding a few drops of oil

(provided) in the 3 oil slots inside

the blade ring. (g. 7)

• Wipe the outside of the clipper

with a damp cloth and dry

thoroughly before storing it.

USING THE FINISHING TRIMMER

The nishing trimmer operates on

2 AA batteries.

Open the battery compartment

cover by pushing it down and

sliding it open. Insert 2 AA

batteries as indicated in the

battery compartment. Replace

the cover by pushing it upward

until it clicks into place.

NOTE: If the clipper remains

unused for a while or if the

batteries have run down, remove

them from the unit. These

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of BaByliss E940XE in the language / languages: All languages as an attachment in your email.

The manual is 1,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

BaByliss E940XE Manual

Product: