547094
9
Zoom out
Zoom in
Previous page
1/71
Next page
9
2. Check that the red charging
indicator light is on.
3. A full charge will supply enough
power for at least 20 minutes.
4. The subsequent charges should
also be 16 hours.
USE ON THE MAINS
To use the trimmer on the mains,
plug the power cord into the unit.
With the trimmer switched o,
plug it into the mains and slide
the switch into the ON position
(if the battery is very weak, wait
about 1 minute).
IMPORTANT! Use only the adaptor
provided with the trimmer Ref.
E940XE = 3V – Current 1500mA.
USING THE COMB GUIDE
IMPORTANT: Always attach the
comb guide BEFORE switching on
the clipper, and turn the clipper
o before removing the guide.
Attaching the comb guide
Hold the clipper with the blades
facing up and centre the comb
guide (with its teeth facing up)
over the clipper. Line up the point
on the comb guide (g. 1) with the
mark ‘I’ on the clipper (g. 2) and
release the comb guide locking
mechanism on the side of the unit
by sliding it up. Then gently turn
the comb guide clockwise until
you hear a click (g. 3).
Make sure the locking mechanism
is engaged and that the comb
guide is in the locked position
before using the Easy Cut clipper.
Changing the comb guide
length setting
The 3 cutting lengths are indicated
by settings 1, 2 and 3 on the guide
(g. 4).
Setting
Cutting
Length
1
2
3
3mm
6mm
9,5mm
To change the cutting length,
release the comb guide locking
mechanism located on the side
of the unit (g. 5) and turn
the cutting guide clockwise or
counter-clockwise depending on
the desired length (g. 6). Line up
the desired cutting length with
the ‘I marked on the clipper.
Make sure that the locking
mechanism is in the locked
position and that the comb guide
is securely positioned before
using the Easy Cut clipper.
Removing the comb guide
To remove the comb guide, unclip
the locking mechanism by lifting
and turning the guide in the
counter-clockwise direction until
it is completely free of the clipper.
BEFORE USING THE EASY CUT
CLIPPER, ALWAYS...
Check your head for warts, moles,
spots and broken skin using a
mirror or ask someone to check
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for BaByliss E940XE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of BaByliss E940XE in the language / languages: All languages as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info