661364
297
Zoom out
Zoom in
Previous page
1/316
Next page
APPENDIX
295
7
There is puckering in
the fabric.
The needle is dull.
Dull needles push fabric down and
damage material. Replace the needle.
p.33, 86
The design density is too heavy.
Too many stitches in an area pull
fabric, causing it to pucker. Slightly
decrease the design density by 5% to
10%.
The LCD cannot be
read.
The LDC screen is too bright or too
dark.
Adjust the brightness of the screen
display.
p. 234
There is no color
indicated on LED light
after the lights flashing,
when the thread color
needs to be changed.
Black is assigned as the next thread
color.
When black is assigned as the next
thread color, LED light does not
indicate the next thread color. The light
turns off after flashing.
p.114
When embroidering
thick fabric, the fabric
cannot be correctly
hooped.
Fabric slips within the frame because of
its thickness.
Wrap masking tape or bias tape around
the outer frame. The tape will provide
resistance so that the fabric does not
easily slip.
p. 253
There is flickering in
built-in camera image
displayed in the LCD
screen.
If the machine is being used in a very
cold environment, there may be
flickering in the built-in camera image
displayed in the LCD screen.
This is not a malfunction. Leave the
machine turned on, and then wait a
while before using the built-in camera.
CAUTION
This machine is equipped with a thread detecting mechanism. If the machine is not threaded with the
upper thread, the machine will not operate correctly, even if the start/stop button is pressed after
unlocking the machine.
If the machine suddenly stops:
Turn off the machine, and unplug the power cord.
Restart the machine with the correct operating procedure. Refer to page 38.
Symptom Probable Cause Remedy Reference Page
297


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Valiant - BMV10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Valiant - BMV10 in the language / languages: English as an attachment in your email.

The manual is 15,54 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Valiant - BMV10

Baby Lock Valiant - BMV10 Additional guide - English - 1 pages

Baby Lock Valiant - BMV10 Additional guide - English, French, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info