661223
15
Zoom out
Zoom in
Previous page
1/56
Next page
13
ENGLISH
b
Adjust the upper thread tension.
For details on adjusting the upper thread tension,
refer to “Adjusting the Thread Tension” in the
Instruction and Reference Guide.
c
Make sure that automatic thread cutting
( ) and automatic reinforcement/reverse
stitching ( ) have been turned off.
d
Place stabilizer on top (wrong side) of the
fabric.
e
If thread is too thick to pull through fabric to
machine surface use an awl to punch a hole in
the fabric at the beginning of stitching so the
bobbin thread can be fed through the
opening.
f
Press .
The screen changes, and all keys and operation
buttons are locked.
g
Use the presser foot lever to raise the presser
foot.
h
With the wrong side facing up, place the
fabric under the presser foot.
a Wrong side of fabric
i
Turn the handwheel toward you
(counterclockwise) to feed the needle into the
fabric or punched hole. Position the upper
thread over the presser foot and lightly hold
then, lower the presser foot lever.
a Punched hole
b Upper thread over the presser foot
j
Pulling the upper thread gently, turn the
handwheel toward you (counterclockwise)
until the mark on the handwheel aligns with
the line on the machine.
A loop of the bobbin thread comes out through the
hole in the fabric.
Memo
We recommend a setting between 6 and 8 for the
upper thread tension.
CAUTION
Before sewing, make sure that automatic thread
cutting has been turned off. If sewing is started with
automatic thread cutting turned on, the thread may
become tangled or the machine may be damaged.
Note
Type and weight of stabilizer will depend on fabric
and thread being used.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Symphony - BLSY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Symphony - BLSY in the language / languages: English as an attachment in your email.

The manual is 10,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Symphony - BLSY

Baby Lock Symphony - BLSY Quick start guide - English - 20 pages

Baby Lock Symphony - BLSY User Manual - English - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info