661223
14
Zoom out
Zoom in
Previous page
1/56
Next page
12
o
Lightly hold the end of the upper thread while
turning the handwheel toward you
(counterclockwise) until the mark on the
handwheel aligns with the line on the
machine.
p
Gently pull the upper thread to pull up the
bobbin thread through the needle plate.
A loop of the bobbin thread comes out through the
hole in the needle plate.
q
Use the presser foot lever to raise the presser
foot.
r
Insert tweezers through bobbin thread loop
and pull bobbin thread above the needle
plate.
s
Align the upper thread and bobbin thread,
and then pull out about 10 cm (approx.
4 inches) of the threads and pass them under
the presser foot toward the rear of the
machine.
t
Install the the cord guide bobbin cover (for
bobbin work and attaching cords).
a Cord guide bobbin cover (for bobbin work and
attaching cords)
u
Press or on the
screen.
All keys and operation buttons are unlocked, and
the previous screen is displayed.
Positioning the Fabric and Sewing
a
Select a stitch. For this example, press .
Note
Recommended stitches for bobbin work are open
“airy” type stitches.
Be sure to sew trial stitches using same fabric and
threads as project in order to check the sewing results.
The bobbin thread may become tangled due to the
type of pattern and thread that are being used. Since
this may cause the needle to break, immediately
stop sewing if this occurs. Turn off the machine, and
then cut out the tangled thread with scissors. Then,
clean the race and bobbin case as described in
“Preparing the Bobbin Thread” on page 9.
Memo
For best results, select a longer stitch length and a
wider stitch width. Depending on the selected stitch,
it may not be possible to change the stitch length
and stitch width.
Depending on the fabric, bunched stitches may
result. We recommend selecting a simple stitch and
sewing trial stitches to check the sewing results.
Examples of simple stitches: , ,
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Symphony - BLSY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Symphony - BLSY in the language / languages: English as an attachment in your email.

The manual is 10,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Symphony - BLSY

Baby Lock Symphony - BLSY Quick start guide - English - 20 pages

Baby Lock Symphony - BLSY User Manual - English - 152 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info