661363
155
Zoom out
Zoom in
Previous page
1/184
Next page
PREPARING FOR BOBBIN WORK
How to Create Bobbin Work (Embroidery)
Embroidering E-89
E
3
f
Wipe the bobbin case (gray) with a soft lint
free cloth to clean it.
g
Insert the bobbin case so that the S mark
on the bobbin case aligns with the mark
on the machine.
* Align the S and marks.
a S mark on the bobbin case
b mark on the machine
c Bobbin case
h
Install the needle plate cover.
For details on installing the needle plate cover,
refer to “Cleaning the Race” of “Appendix”.
a Needle plate cover
i
Install the embroidery unit.
j
Insert the thread tail from the spool of
thread through the hole in the bobbin from
the inside to the outside. Hold the thread
tail while winding the thread around the
bobbin by hand. After winding the bobbin
so it is filled as shown below (about 80%),
cut the thread.
k
Install a bobbin wound with an adequate
amount of thread for pattern.
Note
The bobbin case (gray) cannot be used in
any way other than bobbin work. After
creating bobbin work, refer back to the
steps in “Preparing the Bobbin Thread” on
page E-88 for removing and cleaning the
bobbin case (gray), and then reinstall the
standard bobbin case.
CAUTION
Be sure to use the bobbin case (gray) when
creating bobbin work. Using any other bobbin
case may result in the thread becoming
tangled or damage to the machine.
Make sure that the bobbin case is correctly
installed. If the bobbin case is incorrectly
installed, the thread may become tangled or
the machine may be damaged.
a
b
b
a
Note
For an estimated length of bobbin thread
required for each pattern, refer to the
“Quick Reference Guide” included with the
machine. Be sure to use a bobbin wound
with enough thread. If the bobbin runs out
of thread while sewing, the embroidery
cannot be completed.
Depending on the thread thickness, it may
not be possible to wind the bobbin with the
necessary length of thread. In this case, try
winding the bobbin again, or use a lighter
weight thread.
155


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Spirit - BLPY at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Spirit - BLPY in the language / languages: English as an attachment in your email.

The manual is 14,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Spirit - BLPY

Baby Lock Spirit - BLPY Additional guide - English - 1 pages

Baby Lock Spirit - BLPY Quick start guide - English, French, Spanish - 56 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info