Manual Baby Lock Sashiko - BLQK (page 34 of 43) (English)

661218

Zoom out

Zoom in

1/43

Replacing Needle

1. Press and hold the positioning button for approxi-

mately 2 seconds to set the machine to the loading

position. (Fig. A)

REMINDER: Remove fabric and cut thread before

putting machine into the loading position.

2. Lower the presser foot. (Fig. B)

3. To move the latch wire from in front of the needle

grasp the latch wire lever and pull straight down, turn

the lever 90 degrees towards you and release. Lever

will remain in the down position. (Fig. C)

4. While holding needle with tweezers loosen the nee-

dle clamp screw and remove needle. (Fig. D)

5. With the flat side of the new needle facing the right

side of needle clamp insert the needle into the open-

ing as far up as it will go. Securely tighten the nee-

dle clamp screw. (Fig. E)

6. Restore the latch wire to its original position. (Fig. F)

7. After restoring the latch wire, make sure the latch

wire is in the center channel of needle. (Fig. G)

Position

Positioning

Button

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko - BLQK in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Sashiko - BLQK Manual

Product: