Manual Baby Lock Sashiko - BLQK (page 36 of 43) (English)

661218

Zoom out

Zoom in

1/43

Cleaning the Feed Dog

Lint and fuzz can build up between the teeth of the feed dog area and if not kept clean can hinder the

even feed of your fabric. To properly clean the feed dog areas follow directions below:

1. Press the positioning button so machine is in the loading position; by doing so the wiper will be out

of your way to make cleaning easier.

2. Press the main power switch to the OFF (O) position and unplug the power cord from the wall

outlet.

3. If necessary, remove the presser foot for easier access. Raise the presser foot lever and with screw-

driver remove the presser foot holder screw by turning it counterclockwise. (Fig. A)

4. Remove the two screws holding the needle plate by turning them counterclockwise with screwdriv-

er. Lift and remove needle plate. (Fig. B)

5. Clean the feed dog area thoroughly with lint brush. Use your tweezers to remove any threads that

may be caught in the feed dog teeth. (Fig. C)

6. Reposition the needle plate and tighten screws snugly. Be sure the needle enters the center of the

needle plate opening; otherwise the needle may break and cause injury. (Fig. D)

7. If presser foot was removed, reposition presser foot and the presser foot holder screw then with

screwdriver tighten the screw snugly.

Needle

hole

Cleaning the Machine Surface

If the surface of the Sashiko machine gets dirty, lightly soak a cloth in mild detergent, squeeze it out

firmly and then wipe the machine surface. After cleaning it once in this way, wipe the surface again

with a dry soft cloth.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko - BLQK in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Sashiko - BLQK Manual

Product: