Manual Baby Lock Sashiko - BLQK (page 19 of 43) (English)

661218

Zoom out

Zoom in

1/43

Loading Position

1. Hold the bobbin case with one hand. Insert the fully wound

bobbin into the bobbin case so that the bobbin turns in a

clockwise direction. (Fig. A)

2. Pull the thread through the slot of the bobbin case. (Fig. B)

3. Slide the bobbin thread toward the left so the thread enters

under the tension spring and through the cut out area direct-

ly above the bobbin case double-eye thread guides. (Fig. C)

4. Insert the end of the bobbin thread from right to left through

the bobbin case double eye thread guides. (Fig. D)

5. Pull out approximately 10” (25cm) of bobbin thread.

6. Press and hold the positioning button for approximately 2

seconds to set the machine to the bobbin loading position.

7. Hold the bobbin case by the hinged latch. Align the double

eye thread guides of the bobbin case with the groove (yellow

dot marking) of the shuttle race. Insert the bobbin case fully

into the shuttle race and release the latch. (Fig. E)

Yellow Mark

Inserting the Bobbin

Press and hold the positioning button for approximately 2 sec-

onds and the machine will automatically move to the loading

position. The yellow LED light will now be lit.

The loading position will adjust the machine to enable one of the

following procedures:

1. Insert or remove the bobbin case

2. Replace the latch wire

3. Replace the needle

IMPORTANT: The needle should be in the UP position, the

thread cut, and the fabric removed before setting machine to the

loading position.

NOTE: The blue or green LED light will also be lit, depending

on which needle position was selected prior to pressing the posi-

tioning button for the loading position. If the presser foot is in the

up position or if the side door is open then the orange LED light

will flash while the yellow LED is lit.

10" (25cm)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Sashiko - BLQK in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Sashiko - BLQK Manual

Product: