661214
87
Zoom out
Zoom in
Previous page
1/92
Next page
The fixed blade is made of a special long lasting steel and does not require frequent replacement.
If necessary, contact your nearest retailer for replacement of the blade.
The upper cutting blade is made of a softer steel material and will require replacement. A spare
blade is provided with the machine for replacement if necessary. The spare upper cutting blade is
located in the accessory compartment & thread stand.
If for some reason your machine does not cut or perform as it should be, please take your machine
to your nearest Baby Lock retailer. It is possible that the result of poor cutting may indicate other
problems.
M
A
I
N
T
E
N
A
N
C
E
85
Replacing Cutting Blades
A
TO REPLACE UPPER CUTTING BLADE proceed as follow :
1. For safety reasons, unplug main power cord.
2. Open front cover and cutting blade cover. (fig. A)
3. Remove screw and upper blade. (fig. B)
4. Insert new upper blade into blade slot.
5. Insert screw and place upper blade to its highest position.
6. Hold upper blade in place and tighten screw.
7. Check and make sure that the upper section of cutting area of
blade is set 1mm below the fixed blade when upper blade is in
its lowest position. (fig.C)
8. Close cutting blade cover and front cover.
Replacing LED Lighting
Your Baby Lock Ovation is equipped with a long-life LED lighting system, which is not necessary
to change bulbs.
In case of replacing LED unit, please contact your authorized Baby Lock retailer.
B
C
1 mm
87


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ovation - BLES8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ovation - BLES8 in the language / languages: English as an attachment in your email.

The manual is 10,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info