661214

Baby Lock Ovation - BLES8 Manual

86
Zoom out
Zoom in
Previous page
1/92
Next page
Needle Identification (fig. A)-
The chain/cover stitch needle(s) are on the front left portion of
the needle clamp and are identified by C-1,C-2 and C-3.
C-1-Left chain/cover stitch needle can be used for chain stitch,
left narrow cover stitch, wide cover stitch or triple cover stitch.
C-2-Center chain/cover stitch needle can be used for a chain
stitch, left narrow cover stitch, right narrow cover stitch or triple
cover stitch.
C-3-Right chain/cover stitch needle can be used for a chain
stitch, right narrow cover stitch, wide cover stitch, or triple cover
stitch.
The overlock needles are on the back right portion of the needle
clamp and are identified by O-1 and O-2.
O-1-Left overlock needle can be used for wide overlock stitches.
O-2-Right overlock needle can be used for narrow overlock
stitches and rolled or narrow hemming.
Note: Both overlock needles are used for 4-thread overlock
stitching.
To replace a needle -
1. Raise the needle(s) to the highest position by turning the
handwheel toward you.
2. Using the allen screwdriver, loosen the needle screw for the
needle to be changed. Screws are located by sequence as
indicated above.
Note: To prevent the needle from falling into the needle plate,
hold it with the needle insert tool as you loosen the screw.
(fig. B)
3. Use the needle insert tool or tweezers to insert the new
needle with the flat side to the back.
Insert needle as far as it will go, check the needle viewing
window. (fig. C)
4. Tighten the needle clamp screw.
Note: If you do drop a needle down into the machine just pull out
the needle-drop drawer at the bottom of your serger. The
needle will be on the drawer. (fig. D)
To reinsert the needle-drop drawer use right hand and align
drawer with the left and right slots on bottom of machine and slide
drawer in.
CAUTION:
- Moving Parts- To reduce risk of injury, switch off before
servicing.
CLOSE COVER BEFORE OPERATING MACHINE
M
A
I
N
T
E
N
A
N
C
E
84
Replacing Needles
C1
C2
C3
O1
O2
A
B
C
D
… 86 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ovation - BLES8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ovation - BLES8 in the language / languages: English as an attachment in your email.

The manual is 10,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info