Manual Baby Lock Lyric - BLMLR (page 89 of 140) (English)

661202

89

Zoom out

Zoom in

Previous page

1/140

Next page

Appliqué, Patchwork and Quilt Stitching

Sewing S-31

UTILITY STITCHES

S

e

Hold the quilting foot in place with your right hand,

and tighten the presser foot holder screw using the

screwdriver with your left hand.

1 Presser foot holder screw

f

Use both hands to stretch the fabric taut, and then

move the fabric at a consistent pace in order to sew

uniform stitches roughly 2.0 mm - 2.5 mm (approx. 1/

16 inch - 3/32 inch) in length.

1 Stitch

g

After sewing is finished, slide the feed dog position

switch lever to (to the right as seen from the rear

of the machine) and turn the handwheel to raise the

feed dogs.

■ Using free motion quilting foot “C” (sold

separately with some models)

Use the free motion quilting foot “C” with straight stitch

needle plate for free motion sewing.

 Free motion quilting foot “C”

a

Attach the straight stitch needle plate (sold separately

with some models).

• For details on attaching the straight stitch needle

plate, refer to operation manual supplied with the

product.

1 Round hole

b

Slide the feed dog position switch, located at the rear

of the machine on the base, to (to the left as seen

from the rear of the machine).

1 Feed dog position switch (as seen from the rear of the

machine)

→ The feed dogs are lowered.

c

Select .

d

Remove the presser foot holder.

• For details, refer to “Removing and attaching the

presser foot holder” in the “Basic operations”

section.

CAUTION

• Be sure to securely tighten the screws with the

included screwdriver. Otherwise, the needle

may touch the quilting foot, causing it to bend

or break.

Memo

• Do not be discouraged with your initial results.

The technique requires practice.

CAUTION

• When using free motion quilting foot “C”, be

sure to use the straight stitch needle plate and

sew with the needle in middle (center) needle

position. If the needle is moved to any position

other than the middle (center) needle position,

the needle may break, which may result in

injuries.

Memo

• On models equipped with the free motion sewing

mode, the presser foot can be adjusted to the

best height for free motion sewing. For details,

refer to “Sewing with free motion mode” in the

“Basic operations” section.

Memo

• Notice this needle plate has a round hole for the

needle.

a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Baby Lock Lyric - BLMLR at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Lyric - BLMLR in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info