Manual Baby Lock Lyric - BLMLR (page 87 of 140) (English)

661202

87

Zoom out

Zoom in

Previous page

1/140

Next page

Appliqué, Patchwork and Quilt Stitching

Sewing S-29

UTILITY STITCHES

S

e

Start sewing.

f

When the end of the stitching is reached, stop the

machine.

Sew until the mark at the lower edge of the 1/4" quilting

foot aligns with the lower edge of the fabric.

1 6.4mm (1/4 inch)

2 End of stitching

3 Mark on 1/4" quilting foot

Quilting

Sandwiching batting between the top and bottom layers of

fabric is called “quilting”. Quilts can easily be sewn using the

walking foot* and the quilting guide*.

* Sold separately with some models.

a

Baste the fabric to be quilted.

b

Remove the presser foot and the presser foot holder.

• For details, refer to “Removing and attaching the

presser foot holder” in the “Basic operations”

section.

c

Hook the connecting fork of the walking foot onto the

needle clamp screw.

1 Connecting fork

2 Needle clamp screw

d

Lower the presser foot lever, insert the presser foot

holder screw, and then tighten the screw with the

screwdriver.

1 Presser foot holder screw

e

Select a stitch.

f

Place one hand on each side of the presser foot, and

then evenly guide the fabric while sewing.

Note

• Thread the needle manually when using the

walking foot, or only attach the walking foot after

threading the needle using the needle threader.

• When sewing with the walking foot, sew at a

speed between slow and medium.

• When quilting, use a 90/14 home machine

needle.

• The walking foot can only be used with straight

or zigzag stitch patterns. Reverse stitches

cannot be sewn with the walking foot. Only

select straight or zigzag stitch patterns with

reinforcement stitches. For details, refer to

“Stitch Setting Chart” in the “Basic operations”

section.

• (For models equipped with Automatic Fabric

Sensor System)

When “Automatic Fabric Sensor System” in the

settings screen is set to “ON”, the thickness of the

fabric is automatically detected by the internal

sensor so the fabric can be fed smoothly for best

sewing results. For details on the automatic fabric

sensor system, refer to “Automatic Fabric Sensor

System (Automatic presser foot pressure)” in the

“Basic operations” section.

2

3

1

CAUTION

• Be sure to securely tighten the screws with the

screwdriver, otherwise the needle may touch

the presser foot, causing it to bend or break.

• Before starting to sew, slowly turn the

handwheel toward you (counterclockwise)

and

check that the needle does not touch the

presser foot. If the needle hits the presser foot,

the needle may bend or break.

a

b

a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

Register

Register getting emails for Baby Lock Lyric - BLMLR at:

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Lyric - BLMLR in the language / languages: English as an attachment in your email.

The manual is 8,2 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info