661198
10
Zoom out
Zoom in
Previous page
1/42
Next page
:ON
:OFF
Main Power Switch
US ONLY
Power Connection
2
3
Connect the foot controller plug to the machine.
Connect the power supply plug to a wall outlet.
Use regular household electricity for power source. Using
other power sources may result in fire, electric shock, or
damage to the machine.
Turn off the main power and remove the plug in the following
circumstance:
When you are away from the machine
After using the machine
When the power fails during use
When the machine does not operate correctly due to a bad
connection or a disconnection
During electrical storms
WARNING
This appliance has a polarized plug (one blade wider than
the other). To reduce the risk of electrical shock, this plug
is intended to fit in a polarized outlet only one way. If the plug
does not fit fully into the outlet please reverse the plug. If it
still does not fit, contact a qualified electrician to install the
proper outlet. Do not modify the plug in any way.
Do not use extension cords or multi-plug adapters with
many other appliances plugged in to them. Fire or electric
shock may result.
CAUTION
Do not touch the plug with wet hands. Electric shock may
result.
When unplugging the machine, always turn off the
main power first. Always grasp the plug to remove it from
the outlet. Pulling on the cord may damage the cord, or lead
to fire or electric shock.
Do not allow the power cord to be cut , damaged, modified,
forcefully bent, pulled, twisted, or bundled. Do not place
heavy object on the cord. Do not subject the cord to heat.
These behaviors may damage the cord and cause fire or
electric shock. If the cord or plug is damaged, take the
machine to your authorized Baby Lock retailer for repairs
before continuing use.
Unplug the power cord if the machine is not to be used for a
long period of time, otherwise a fire may result.
Connect the foot control to the machine by inserting the 3 hole plug
into the power cord receptacle located on the right side of sewing
machine.
When you press the foot controller lightly, the machine will run at
a low speed.
When you press harder, the speed of machine will increase.
When you take your foot off the foot controller, the machine will stop.
You should make sure that no items are placed on the foot controller
when the machine is not in use.
CAUTION
Foot Controller
Do not allow pieces of cloth and dust to build up on the foot controller.
Doing so could cause a fire or an electric shock.
1
2
Use only foot controller provided with this
machine.Foot Controller: Model YC-482
-8-
1
Place machine on a sturdy table and make sure
the main power switch is in the OFF position.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jazz - BLMJZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jazz - BLMJZ in the language / languages: English as an attachment in your email.

The manual is 5,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info