661197
25
Zoom out
Zoom in
Previous page
1/60
Next page
23
Free Motion Quilting Foot
Reduce the foot pressure and turn
the dial on the machine lowering the
feed dog for free motion quilting.
Note
If the foot is frequently used, be •
sure to apply a small amount of
oil about once a month to the
area indicated by the arrows. (If
too much oil is applied, wipe off
the excess with a cloth.)
For best results when using •
metallic or monofilament
threads for free motion quilting,
sew with a good quality thread,
set upper tension 1-2, and use
a metallic needle.
Walking Foot
Forked part
of operation
lever
Secure the
cap screw
with a
screwdriver.
1
2
Note
Do not press the foot controller •
all the way down.
Try to keep the sewing speed
low (500 r.p.m. or less).
The fabric may not feed •
properly if you sew at high
speeds.
The feed dog for feeding the •
cloth may not move if the foot
pressure on the fabric is too
strong. Use the presser foot
pressure adjustment dial to
achieve the desired results.
It is not advisable or necessary •
to use the Pin Feed mode with
the walking foot.
Insert the forked part of the 1
operation lever, while raised in
an upright position, onto the
screw on the right side of the
needle bar, as shown and then
insert the cap screw.
Tighten the screw securely 2
with a screwdriver. Tightening
adequately is important as the
screw might loosen due to the
foot and forked operation lever
vibration.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane BL510A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane BL510A in the language / languages: English as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info