661197
23
Zoom out
Zoom in
Previous page
1/60
Next page
21
Basic Sewing (3)
Zipper Foot
Attach zipper foot.1
See “Changing Presser Feet
(Zipper Foot)” on page 18.
Turn the handwheel towards you
2
to lower the needle and adjust
the position of the foot relative to
the needle using the adjustment
screw to slide the foot from left
to right.
Secure the zipper with basting 5
and sew along the mark.
CAUTION
Make sure the needle does not
strike the metal part of the zipper
when sewing. The needle may
break and cause injury.
Line up the folded hem on the 6
opposite side with the stitches.
Line up zipper to the section of 3
fabric it will be attached to, and
mark the base of the opening
on the fabric. It should be set
approximately 0.5 cm (3/16 inch)
below zipper stop. Sew from
below the base of the opening.
Divide the seam margin. Fold 4
the seam margin with the
overlap of the zipper position
facing down 0.2 cm (1/16 inch)
on the outside of the mark.
A
0.5 cm
Slide
Base of
Opening
Stop
0.2 cm
Change position of zipper foot.7
Turn the handwheel to lower the 8
needle and position the presser
foot.
With the fabric right side up,
9
baste the zipper onto the fabric,
then sew the edge of the basting.
Reinforce base of opening by
sewing over it twice.
If the zipper slide gets in the
way, lower the needle all the way
through the fabric, raise the foot,
and move the slider out of the way.
B
CAUTION
Make sure the power to the machine is off before changing feet.•
When attaching zippers to stretch fabrics, use the pin feed method and •
adjust foot pressure accordingly.
The zipper foot can also be used as a guide when attaching piping to •
fabric.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane BL510A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane BL510A in the language / languages: English as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info