661197
20
Zoom out
Zoom in
Previous page
1/60
Next page
18
Changing Presser Feet
(Zipper Foot)
Raise presser foot, and raise 1
needle to highest position.
Loosen and remove screw using 2
screwdriver.
Changing Presser Feet
Presser Feet
Attach zipper foot and tighten 3
screw.
Use the same method to attach
the other feet that come with
your machine.
See page 23 for directions on
attaching the “Walking Foot”.
Use the position knob on back of
the zipper foot to adjust position
of foot in relation to needle.
Only the zipper foot has a
position knob. You can begin
sewing with all other presser feet
immediately after attaching.
Use only feet supplied with your machine. Each foot is
specially designed for this machine and has clearance for
the pin at the rear of each foot. Use of other presser feet
may damage or break the pin feed mechanism.
CAUTION
Make sure the power to the machine is off before changing presser feet.
Walking Foot
For sewing or
quilting on fabrics
which stick or tend
to slip. Useful for
sewing multiple
layers as in quilting.
1/4” Foot
For quilt and
patchwork piecing
with 1/4” or 1/8”
seam allowance.
Zipper Foot
Use to attach fasteners
other than concealed
fasteners. The zipper
foot can also be used
to secure piping in
place as you sew. Use
the side of the foot
closest to the needle to
rest against the edge of
the piping as you sew.
General Purpose Foot
This foot is used for
most sewing. (Can
also be used for
sewing thick fabrics or
seams.)
When sewing thick
seams, lightly guide
the fabric with your
hand on the downward
side of the seam.
Can also be used with
pin feeding.
Flex Reaction
Foot
For perfect
stitching on
otherwise difficult
fabrics like velvet,
leather and suede.
Rolled Hem Foot
Use on the edge
of fabric, such as
on hems of dress
shirts, to fold the
edge of the fabric
in three while
sewing.
Invisible Zipper Foot
Use to attach
concealed fasteners.
Free Motion
Quilting Foot
Spring action
foot for darning,
quilting or
free motion
embroidery.
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane BL510A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane BL510A in the language / languages: English as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info