661197
19
Zoom out
Zoom in
Previous page
1/60
Next page
17
Stitch Samples and Needle Chart
Stitch Samples
Set stitch length regulator to 1
desired stitch length.
Make sure approximately 15 2
cm (6 inches) of upper thread
is pulled under the presser
foot and toward the rear of the
machine. While needle is in
raised position, insert a test strip
from the garment fabric under
the foot.
Lower presser foot.3
Turn the handwheel toward you 4
to lower the needle through the
fabric, then press gently on the
foot controller to begin.
Turn the handwheel toward you
5
to raise the needle and thread
take-up lever to their highest
positions.
Raise the presser foot, remove 6
fabric and then manually cut the
thread with the cutter on the left
side of the head of the machine
or with a pair of scissors.
When using thread cutter:
5
Press the thread cutter button
while the presser foot lever is in
the down position
.
6
Raise presser foot and remove
fabric.
Thread Tension
Bobbin thread should feed smoothly. Adjust bobbin thread
to match that of upper thread. (If bobbin thread is too tight
it may cause fabric to bunch up.)
to increase
bobbin
tension
to reduce
needle
thread
tension
to increase
needle
thread
tension
Fabric
Upper
Thread
Lower
Thread
to reduce
bobbin
tension
Correct thread tension
Incorrect thread tension can lead
to such undesirable results as
messy stitches, puckered seams
and thread breakage.
Upper
Thread
Lower
Thread
Right side of Fabric
Upper
Thread
Lower
Thread
Right side of Fabric
Wrong side of fabric
Bobbin tension . . .
Proper
When it is week
Bobbin tension . . .
Proper
When it is strong
Wrong side of fabric
Adjust the upper thread to match the bobbin thread.
Selecting the proper needle for use with the fabric and thread you are working with
The following chart applies to many different fabric, thread and needle combinations.
HLX5 needles are recommended; however, Schmetz 130/705H needles may also be used under normal
sewing conditions.
Adjust the pressure adjustment dial and the feed dog adjustment knob according to the chart on the sewing
machine.
When sewing on knit fabrics such as jersey or tricot, use a ballpoint needle or a needle designed for use with
knit fabrics.
For best results when using metallic threads, sew with a good quality thread, set upper tension on 2, and
use metallic needle.
Fabric - Thread - Needles
Cloth Thread Needle (HLX5)
Specialty
fabrics
Velvet Silk, Polyester #30 – #50 #11 – #14
Quilt Polyester #20 – #50 #11 – #16
Synthetic Suede Polyester #20 – #50
Knit Polyester #20 – #50
Coating Polyester #50 #11 – #14
Light
weight
fabrics
Lawn Cotton #80 #9
Tricot Polyester #60
Silk Georgette Silk #50
Wool Georgette Silk, Polyester #50 #11
Medium
weight
fabrics
Gingham Cotton #60 – #80 #11 – #14
Lightweight Jersey Polyester #60 #11
Gabardine, Flannel Silk #50
Heavy
weight
fabrics
Denim Cotton #20 – #50 #14 – #18
Jersey Polyester #20 – #50 #11 – #16
Tweed Silk #20 – #50
HLX5
Schmetz
130/705H
#9 #65
#11 #75
#14 #90
#16 #100
#18 #110
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane BL510A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane BL510A in the language / languages: English as an attachment in your email.

The manual is 9,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info