661196
23
Zoom out
Zoom in
Previous page
1/52
Next page
17
Invisible Zipper Foot
1 Attach invisible zipper foot.
2 Align zipper with fabric. Mark the
base of the opening approxi-
mately 2 cm above the end of the
zipper.
3 Baste the zipper position.
4 Separate the seam allowance.
5 With the zipper mounted, baste
just the seam margin on one side
of the zipper.
6 Close the zipper and baste the
other side of the zipper.
7 Remove the basting at the zipper
position.
8 Fit the zipper teeth into the
presser foot groove, guide them
to prevent them from falling over,
and sew to the base of the open-
ing.
When sewing with the teeth to
the right, the left side of the foot
should line up with the left teeth
of the zipper.
Baste
2 cm
Base of
Opening
Slide
Teeth
Basting
Basting
1/4 Foot
Sewing machine settings:
Stitch length = 2 - 2.5
Sew a consistent seam allow-
ance (1/4, 6.4 mm) when piec-
ing together a quilt.
Use guides (mark) to begin, end,
or pivot 1/4 from edge of fabric.
Accurately top stitch 1/8 from
seam.
Seam allowance
(1/4, 6.4 mm)
End of
stitching
Align this
mark with
edge of
fabric
Align this
mark with
edge of
fabric
Beginning
of
stitching
Top of fabric
Seam
(1/8, 3.2 mm)
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Jane - BL500A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane - BL500A in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info