Manual Baby Lock Jane - BL500A (page 22 of 52) (English)

661196

Zoom out

Zoom in

1/52

Basic Sewing (3)

Note

• Make sure power is off before changing feet.

• When attaching zippers to stretch fabrics, use the pin feed method

and adjust foot pressure accordingly.

• The zipper foot can also be used as a guide when attaching piping to

fabric.

Zipper Foot

1 Attach zipper foot.

✽ See “Changing Presser Feet (Zip-

per Foot)” on page 13.

Turn the hand wheel towards you

to lower the needle and adjust the

position of the foot relative to the

needle using the adjustment screw

to slide the foot from left to right.

3 Line up zipper to the section of

5 Secure the zipper with basting

and sew along the mark.

Make sure the needle does

not strike the metal part of the

zipper when sewing. The

needle may break and cause

injury.

fabric it will be attached to, and

mark the base of the opening on

the fabric. It should be set ap-

proximately 0.5 cm below zipper

stop. Sew from below the base of

the opening.

4 Divide the seam margin. Fold the

seam margin with the overlap of

the zipper position facing down

0.2 cm on the outside of the

mark.

0.5 cm

Slide

Base of

Opening

Stop

0.2 cm

6 Line up the folded hem on the op-

posite side with the stitches.

7 Change position of zipper foot.

8 Turn the hand wheel to lower the

needle and position the presser

foot.

9 With the fabric right side up, baste

the zipper onto the fabric, then

sew the edge of the basting.

✽ Reinforce base of opening by

sewing over it twice.

✽ If the zipper slide gets in the way,

lower the needle all the way

through the fabric, lift the foot, and

move the slider out of the way.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Jane - BL500A in the language / languages: English as an attachment in your email.

The manual is 1,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Jane - BL500A Manual

Product: