614493

Baby Lock Imagine BLE 1AT-2 Manual

29
Zoom out
Zoom in
Previous page
1/54
Next page
Sew a 2-thread flatlock seam then pull the two fabric layers apart
until the seam lies flat (fig. A).
Because the threads show on the outside as well as the inside of
the garment or project, the flatlock seam is often considered a
decorative application (fig. B).
For 2-thread flatlock - narrow
1. Lock the machine.
2. Place needle thread on right needle spool pin.
3. Thread needle thread through the upper looper thread guide on
top of the machine, then go down the thread path in the front of
the machine. Go left with the needle thread at the hook on front
of the machine. Then take the needle thread through the normal
needle thread paths. (See illustration below).
4. Engage the subsidiary looper following step 3 on page 25.
5. Thread the lower looper as shown in the illustration below.
If you want the "overlock stitching" to show on the right side of the
fabric, place wrong sides together and sew. (Fig. C)
2
T
H
R
E
A
D
O
V
E
R
L
O
C
K
27
2-Thread Flatlock - Narrow
A
B
C
D
A
B
C
D
A
B
NEEDLES
right
LENGTH
3-3.5
WIDTH
3.5
STITCH
SELECTOR
B
C
Loop
Wrong Side
Needle
Thread
Right
Side
Looper
Thread
Right
Side
Wrong Side
0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 29
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Imagine BLE 1AT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info