614493

Baby Lock Imagine BLE 1AT-2 Manual

27
Zoom out
Zoom in
Previous page
1/54
Next page
Left or right needle positions can be used for 2-thread
serging.
See machine threading illustrations on page 26 for wide
and page 27 for narrow.
1. Place the left needle thread on far left spool pin (or right
needle thread on second from left spool pin) and bring
the thread end through the telescopic thread guide
directly above the spool of thread. Bring the thread
through the top thread guide that is normally used for
the upper looper (3rd from left), and down the front.
Then take the thread to the left and thread the machine
as you would for the needles in their normal position.
(see illustration on page 26 for correct threading).
2. Using the needle threader, thread the eye of left or right
needle. (see page13 for threading of needles)
3. Rotate the handwheel to bring the upper looper into
position to attach the subsidiary looper. Rotate the
subsidiary looper up and to the left (fig.B) then slip the
end into the upper looper eye. (fig.C) Close the cutting
blade cover and front cover.
4. Unlock the machine to expose the thread. Using your
tweezers, pull the thread out of the tubular looper at the
lower end of the looper tube. Bring the thread up to the
large thread guide below the face plate and to the left
under the square guide. Bring the thread up and over
the take-up lever slot, down and into the last thread
guide above the overlock needles.
5. The needle and lower looper threads should overcast
evenly on the cut edge of the fabric.
6. Rotate the handwheel to bring the upper looper to its lowest position. Rotate the subsidiary looper up and
to the left (fig. B) then slip the end into the upper looper eye (fig. C). Close the blade cover and front cover.
7. The needle and lower looper thread should overcast evenly on the cut edge of the fabric.
Note: The blade cover has been removed in photos B and C for a clear view. You do not need to remove
the blade cover.
2
T
H
R
E
A
D
O
V
E
R
L
O
C
K
25
2-Thread Overlock
Converting from 3-Thread Overlock
to 2-Thread Overlock
A
B
C
The 2-thread function provides an economical and less bulky means of overedging all fabrics. The
standard 2-thread overlock is the same as a 2-thread flatlock stitch.
When sewn with specialty threads, 2-thread sewing makes decorative seams and edges for activewear, chil-
dren's clothing , ruffles, and hemlines.
0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 27
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Imagine BLE 1AT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info