614493
17
Zoom out
Zoom in
Previous page
1/54
Next page
S
E
R
G
I
N
G
W
I
T
H
F
A
B
R
I
C
15
Thread Delivery System
Stitch Selector
Re-threading Needles
Re-threading Loopers
The Baby Lock Imagine revolutionizes the way a serger works with its Thread Delivery System. You no
longer have to manually adjust the tension settings for the type of stitch you are serging. Select the type
of stitch you wish to serge, the Imagine will automatically feed the correct amount of thread through the
loopers and thread guides to form a perfect stitch every time.
The stitch selector controls the thread delivery system and is located on
the right front side of the machine. To select a stitch setting, move the
stitch selector lever to A, B, C, or D.
A - For Wide Overlock Stitches.
B - For Right Needle Stitch, and right needle overlock stitches.
C - For narrow stitches, and Rolled Stitch using right needle.
D - For 3-Thread Rolled Hem stitch.
See chart on last page for stitch selection settings.
If a thread breaks, raise the presser foot and pull the broken thread out from under the foot. Open the front
cover, depress the machine lock button and set the looper threader selector to U or L for the looper being
threaded. Re-thread the machine above the threading port, leaving an 18inch (40cm) thread tail. Thread
the looper as usual and move lock button release lever to the right. Close the front cover and sew a test
sample. Refer to page 13 for further information.
Note: When re-threading your Baby Lock Imagine using the "Jet-Air Threading" feature, make sure that
the previous thread that was in the looper (tube) is completely removed. This will eliminate any chance of
the previous thread obstructing the flow of the air when re-threading the machine.
If a needle thread breaks, raise the presser foot, remove the broken thread and rethread the needle thread
guides. Turn the handwheel and line up the green marks on the handwheel and machine. Select the "R"
or "L" for the needle being rethreaded. Use the needle threader for exact and easier threading. Refer to
pages 12/13 for further information.
0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Imagine BLE 1AT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info