Manual Baby Lock Imagine BLE 1AT-2 (page 16 of 54) (English)

614493

Zoom out

Zoom in

1/54

Serging with fabric

Clearing the Stitch Width Fingers

With the needle and upper looper threads under the foot and to the

back, lower the presser foot. While holding the threads in your left

hand, press down on the foot controller gently to begin a thread

chain before serging fabric (fig.A).

You can leave the presser foot down for most serging applications.

Just place the fabric at the toe of the presser foot. As you step on

the foot controller, the feed dogs will begin moving the fabric toward

the needle (fig.B). You need to raise and lower the foot only when

working with thick, spongy or lofty fabrics, or when precise posi-

tioning is required.

Be careful not to push or pull the fabric. The Imagine will feed it

evenly without help. At the end of a seam, just sew off the fabric

edge and continue serging to create 5" - 6" thread chain. Cut the

thread chain with the thread cutter on the left side cover (fig.C).

As you sew, you will discover that maneuvering the fabric is different

from conventional sewing because the threads form around the

stitch fingers (fig. A).

To clear the stitch fingers, simply raise the presser foot, which releas-

es all threads. Raise the needle(s). Then pull the threads gently

from behind the foot (fig. B). The stitches are now released from the

fingers (fig. C).

0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 16

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Imagine BLE 1AT-2 Manual

Product: