614493
12
Zoom out
Zoom in
Previous page
1/54
Next page
S
E
R
G
E
R
S
E
T
U
P
10
Threading Your Imagine
Locked Position for Threading
Lower Looper
Lock Button
Release Lever
Machine Lock
Button
A
Looper Threader
Selector
B
Your Baby Lock Imagine is equipped with an exclusive "Instant Jet-Air Threading System" for fast, easy
threading of the upper and lower loopers.
One push of the "Jet-Air" threading lever will automatically thread the loopers. It is no longer necessary to
use tweezers for threading the thread guides.
If a thread breaks or runs out, just re-thread it. There is no need to follow any threading sequence.
1. Open the front cover.
2. Raise the presser foot to release all threads.
3. Depress the machine lock button firmly. Rotate the machine handwheel slowly toward you until the but-
ton "snaps" into the locked position and the lock button release lever moves to the far left (fig.A).
Note: The Imagine must be in the locked position when threading the loopers unless otherwise indicat-
ed.
1. With the presser foot up and machine lock button in the locked position (fig. A) , set the looper threader
selector lever to "L" for lower looper threading (fig. B).
2. Place the thread cone or spool on the far right front spool pin on the thread stand (fig.C page 11).
Slip the thread into the telescopic antenna thread guide "1" directly above the spool, snap into the thread
guide "2" at the top of the machine, through the slot on the front of the machine. (fig. C page 11)
3. Pull 18 inches (45cm) of thread through guide "3". Insert the end of the thread into the threading port "L"
about 1 inch (2.5cm) . Use tweezers if necessary, to insert the thread end more easily.
4. Depress the looper threading lever (fig. D page 11) . If the thread does not go through the lower looper
eye with one push, depress the threading lever again until it does. *(see page 11)
5. Clip the thread 4 inches (10cm) from the lower looper eye and leave it hanging loose.
6. Move the lock button release lever to the right.
0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Imagine BLE 1AT-2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info