Manual Baby Lock Imagine BLE 1AT-2 (page 11 of 54) (English)

614493

Zoom out

Zoom in

1/54

Setting Up Your Imagine

When using threads on cones or king spools place the cone or

spool securely over the cone holders furnished on your machine.

To avoid bending the thread stand, you may need to place one hand

under the stand while positioning the cone. The cone holders pre-

vent the cone or spool from spinning, enabling the thread to feed

evenly (fig.A).

Because threads for the serger feed from the top, standard spool

threads can snag on the rough edges of many of these spools.

That's why spool caps are furnished with your Imagine to provide a

smooth surface that enables the thread to reel off freely. With the

spool notch side down, insert a spool cap into the top of the spool

(fig.B).

When using standard spool threads on your serger, replace the

cone holders with the sponge disks furnished with your machine.

These disks hold smaller spools securely and help the thread to reel

off properly. With the sponge disk in place, put the capped spool on

the spindle (fig.C).

Thread nets may be placed over threads that tend to slip off the bot-

tom of the spool during sewing. Most threads do not require their

use, but nets often are necessary with nylon, rayon or silk threads

(fig.D). Once it's on the spool, fold the net back on itself, if neces-

sary, to enable the thread to feed smoothly without snagging on the

net (fig.E).

0001.qxp:AT-2En Ta.qxd 09/05/29 13:23 Page 11

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Imagine BLE 1AT-2 in the language / languages: English as an attachment in your email.

The manual is 4,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Imagine BLE 1AT-2

Baby Lock Imagine BLE 1AT-2 User Manual - Dutch - 59 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Baby Lock Imagine BLE 1AT-2 Manual

Product: