614492

Baby Lock Evolve BLE8W Manual

79
Zoom out
Zoom in
Previous page
1/92
Next page
Heavy-weight threads can be used through your regular looper thread
paths. Specific techniques may require that the thread bypass the
thread port for the thread pull to be loosened. Start with the machine
threaded with regular serger thread.
1. Open front cover and raise the presser foot.
2. Just above the threading port, clip the looper thread to be replaced.
Pull the thread out of the upper guides and remove the cone.
3. Place the specialty thread on the spool pin. Thread it into the upper
guides and clip it a couple of inches beyond the base plate (fig. A).
4. With machine lock button released, use the tweezers to pull the exist-
ing looper thread out of tube extending from the threading mecha-
nism (fig. B). Leave the thread in the looper arm.
5. Tie the specialty thread onto the regular thread with an overhand knot
(fig. C). Pull on the regular thread from the looper eye until the spe-
cialty thread comes through the looper eye.
6. Place upper looper thread under the foot and to the left: clip lower
looper thread at the base plate.
If the thread is heavy and the overhand knot (step #5) is too large for the
looper tube, follow directions #1 thru #6 on page 79 to make a thread
cradle. Then:
1. Release machine lock button.
2. While holding the loose ends of the thread cradle with one hand, use
the tweezers to pull the cradle loop out of the tube extending from the
threading mechanism with the other hand.
3. Insert 2 inch(5cm) of your decorative thread into the cradle loop. Pull
on the loose ends of the thread cradle from the looper eye until the
specialty thread comes through the looper eye.
S
P
E
C
I
A
L
T
Y
T
H
R
E
A
D
S
77
Bypassing the Threading Port
A
B
C
D
… 79 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Evolve BLE8W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Evolve BLE8W in the language / languages: English as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info