661185
13
Zoom out
Zoom in
Previous page
1/29
Next page
12
r
Raise the needle and presser foot.
s
Leaving about 10 cm (approx. 4 inches) of
thread at the ends, use scissors to cut the
threads.
a 10 cm (approx. 4 inches)
Finishing the thread ends
a
At the end of the stitching, use a hand sewing
needle to bring the bobbin thread up to the
wrong side of the fabric.
a Wrong side of fabric
b Bobbin thread
b
Working from the wrong side of the fabric, tie
the bobbin and upper threads together by
hand. Cut away excess threads with scissors.
a Wrong side of fabric
b Right side of fabric
c
If the desired results could not be achieved,
adjust the tension of the bobbin thread and of
the upper thread, and then try sewing the
stitching again.
For more details, refer to “ADJUSTING THE
THREAD TENSION” on page 17.
Bobbin Work Free Motion Sewing
For bobbin work free motion sewing use the
instructions for “CREATING BOBBIN
WORK (SEWING)” on page 10.
For information about using the free motion
quilting foot “C”, free motion open toe
quilting foot “O”, or free motion echo
quilting foot “E” refer to “Free-Motion
Quilting” located in the machine’s
Instruction and Reference Guide.
If so desired, use a template or draw your
design on the stabilizer to allow for ease of
stitching. Remember, your stitches with your
decorative thread will be on the underneath
side of your fabric and the stabilizer will be
on the top of the wrong side of your fabric.
Note
Do not press the “Thread Cutter” button to cut the
threads, otherwise the machine may be damaged.
Note
If it is difficult to place bobbin thread through the eye
of a hand sewing needle, use a ribbon embroidery
needle to pull the thread up to the wrong side of the
fabric. Otherwise, use an awl to pull up the bobbin
thread.
Note
To ensure threads do not come undone after being
tied place a drop of fabric glue on knots.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ellisimo BLSO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ellisimo BLSO in the language / languages: English as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Ellisimo BLSO

Baby Lock Ellisimo BLSO Additional guide - English - 49 pages

Baby Lock Ellisimo BLSO Additional guide - English - 8 pages

Baby Lock Ellisimo BLSO Quick start guide - English - 76 pages

Baby Lock Ellisimo BLSO User Manual - English - 364 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info