661185
11
Zoom out
Zoom in
Previous page
1/29
Next page
10
CREATING BOBBIN WORK (SEWING)
Positioning the Fabric and Sewing
a
Turn on the machine.
b
Select a stitch in the Utility and Decorative
Stitches mode. For this example, press .
c
Adjust the upper thread tension.
For details on adjusting the upper thread tension,
refer to “Setting the Thread Tension” in the
machine’s Instruction and Reference Guide.
d
Make sure the automatic thread cutting
( ) and automatic reinforcement/reverse
stitching ( ) have been turned off.
e
Place stabilizer on top (wrong side) of the
fabric.
f
If thread is too thick to pull through fabric to
machine surface use an awl to punch a small
hole in the fabric at the beginning of stitching
so the bobbin thread can be fed through the
opening.
g
Press .
The screen changes, and all keys and operation
buttons are locked.
h
Use the presser foot lever to raise the presser
foot.
i
With the wrong side facing up, place the
fabric under the presser foot.
a Wrong side of fabric
Note
Recommended stitches for bobbin work are open
“airy” type stitches.
Be sure to sew trial stitches using same fabric and
threads as project in order to check the sewing results.
The bobbin thread may become tangled due to the
type of pattern and thread that are being used. Since
this may cause the needle to break, immediately
stop sewing if this occurs. Turn off the machine and
cut out the tangled thread with scissors. Then, clean
the race and bobbin case as described in “Preparing
the Bobbin Thread” on page 6.
Memo
For best results, select a longer stitch length and a
wider stitch width. Depending on the selected stitch,
it may not be possible to change the stitch length
and stitch width settings.
Depending on the fabric, bunched stitches may
result. We recommend selecting a simple stitch and
sewing trial stitches to check the sewing results.
Examples of simple stitches: , ,
Memo
We recommend a setting between 6 and 8 for the
upper thread tension.
CAUTION
Before sewing, make sure the automatic thread
cutting has been turned off. If sewing is started with
automatic thread cutting turned on, the thread may
become tangled or the machine may be damaged.
Note
Type and weight of stabilizer will depend on fabric
and thread being used.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Baby Lock Ellisimo BLSO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Baby Lock Ellisimo BLSO in the language / languages: English as an attachment in your email.

The manual is 5,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Baby Lock Ellisimo BLSO

Baby Lock Ellisimo BLSO Additional guide - English - 49 pages

Baby Lock Ellisimo BLSO Additional guide - English - 8 pages

Baby Lock Ellisimo BLSO Quick start guide - English - 76 pages

Baby Lock Ellisimo BLSO User Manual - English - 364 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info