752502
33
Zoom out
Zoom in
Previous page
1/42
Next page
Check the water supply device and the release often. You should avoid the
condition of no water or air entering into system, as this will inuence
unit‘s performance and reliability. You should clear the pool/spa lter reg-
ularly to avoid damage to the unit as a result of the dirty of clogged lter.
The area around the unit should be dry, clean and well ventilated. Clean
the side heating exchanger regularly to maintain good heat exchange as
conserve energy .
The operation pressure of the refrigerant system should only be serviced
by a certied technician .
Check the power supply and cable connection often. Should the unit begin
to operate abnormally, switch it o and contact the qualied technician.
Discharge all water in the water pump and water system, so that freezing
of the water in the pump or water system does not occur. You should dis-
charge the water at the bottom of water pump if the unit will not be used
for an extended period of time. You should check the unit thoroughly and
ll the system with water fully before using it for the rst time after a
prolonged period of no usage.
Checks to the area
Prior to beginning work on systems containing ammable refrigerants,
safety checks are necessary to ensure that the risk of ignition is mini-
mised. For repair to the refrigerating system, the following precautions
shall be complied with prior to conducting work on the system.
Work procedure
Work shall be undertaken under a controlled procedure so as to minimise
the risk of a ammable gas or vapour being present while the work is be-
ing performed.
General work area
All maintenance sta and others working in the local area shall be in-
structed on the nature of work being carried out. Work in conned spaces
shall be avoided. The area around the workspace shall be sectioned o.
Ensure that the conditions within the area have been made safe by control
of ammable material.
Checking for presence of refrigerant
The area shall be checked with an appropriate refrigerant detector prior
to and during work, to ensure the technician is aware of potentially am-
mable atmospheres. Ensure that the leak detection equipment being used
is suitable for use with ammable refrigerants, i.e. non-sparking, ade-
quately sealed or intrinsically safe.
Presence of re extinguisher
If any hot work is to be conducted on the refrigeration equipment or any
associated parts, appropriate re extinguishing equipment shall be avail-
5. MAINTENANCE AND INSPECTION
33
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Azuro Inverter at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Azuro Inverter in the language / languages: English as an attachment in your email.

The manual is 1,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info