Manual Axis 211 (page 39 of 60) (English)

613428

Zoom out

Zoom in

1/60

AXIS 210/211 - System Options

For more information, please see the online help .

Network - SOCKS

SOCKS is a network proxy protocol. The cameras can be configured to use a SOCKS server

to reach networks on the other side of a firewall/proxy server. This functionality is useful if

the camera is located on a local network behind a firewall, but notifications, uploads,

alarms, etc., need to be sent to a destination outside the local network (e.g. to the Internet).

Network - SMTP (e-mail)

Enter the host names or addresses for your primary and secondary mail servers in the fields

provided, to enable the sending of event and error e-mail messages from the camera to

predefined addresses via SMTP.

QoS (Quality of service)

Quality of Service (QoS) provides the means to guarantee a certain level of a specified

resource to selected traffic on a network. Quality can be defined as e.g. a maintained level

of bandwidth, low latency, no packet losses, etc. The main benefits of a QoS-aware

network can be summarized as:

• The ability to prioritize traffic and thus allow critical flows to be served before

flows with

lesser priority.

• Greater reliability in the network, thanks to the con

trol of the amount of band-

width an application may use, and thus control over bandwidth races

between

applications.

The QoS in Axis network video products marks th

e data packets for various types of

network traffic originating from the product. This makes it possible for network routers

and switches to e.g. reserve a fixed amount of bandwidth for these types of traffic. The

AXIS 210/211 marks the following types of traffic:

•video

•event/alarm

• management network traffic.

QoS Settings

For each type of network traffic supported by your Axis network video product, enter a

DSCP (Differentiated Services Codepoint) value. This value is used to mark the traffic’s IP

header. When the marked traffic reaches a network router or switch, the DSCP value in the

IP header tells the router or switch which type of treatment to apply to this type of traffic,

for example, how much bandwidth to reserve for it.

Note that DSCP values can be entered in decimal or hex

form, but saved values are always

shown in decimal.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Axis 211 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Axis 211 Manual

Product: