613428
38
Zoom out
Zoom in
Previous page
1/60
Next page
38
AXIS 210/211 - System Options
Notes: For NAT traversal to work, this must also be supported by the broadband router.
The broadband router has many different names: “NAT router”, “Network router“, Internet Gateway”,
“Broadband sharing device” or “Home firewall” but the essential purpose of the device is the same.
Enable/Disable - When enabled, the AXIS 210/211 will attempt to configure port mapping
in a NAT router on your network, using UPnP™. Note that UPnP™ must be enabled in the
camera (see System Options > Network > UPnP).
Use manually selected NAT router - Select this
option to manually select a NAT router
and enter the IP address for the router in the field provided.
If a router is not manually specified, the AXIS 210/211
will automatically search for NAT
routers on your network. If more than one router is found, the default router will be
selected.
Alternative HTTP port - Select this option to man
ually define an external HTTP port. Enter
the port number in the field provided. If no port is entered here a port number will
automatically be selected when NAT traversal is enabled.
Notes:
An alternative HTTP port can be used/be active even if NAT traversal is disabled. This is useful if e.g. your
NAT router does not support UPnP and you need to manually configure port forwarding in the NAT router.
If you attempt to manually enter a port that is already in use, another available port will automatically be
selected.
When the port is selected automatically it will be displayed in this field. This can be changed by entering a
new port number and clicking Save.
RTSP
The RTSP protocol allows a connecting client to start an MPEG-4 stream. Enter the RTSP
port number to use. The default setting is 554.
FTP
The FTP server running in the AXIS 210/211 enables the upload of e.g. new firmware, user
applications, etc. Check the box to enable the service.
Network Traffic
The default setting is Auto-negotiate which means that the correct speed is automatically
selected. If necessary, you can set the connection speed by selecting it from the drop-down
list.
Maximum bandwidth
- Specify, in Mbit/s or kbit/s, the maximum bandwidth the AXIS
210/211 will be allowed to use on your network. This is a useful function when connecting
the camera to busy or heavily loaded networks. The default setting is Unlimited.
Note:
When using MPEG-4 as the video format, remember that setting a maximum bandwidth value here may
create problems for individual video streams if the maximum value is less than the sum of the bit rates set
for the video streams.
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 211 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 211 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info