613427
54
Zoom out
Zoom in
Previous page
1/60
Next page
54
AXIS 210/211 - Troubleshooting
For additional assistance, please contact your reseller or see the support pages on the Axis
Website at www.axis.com/techsup
Poor rendering of MPEG-4 images. Color depth set incorrectly on clients. Set to 16-bit or 32-bit color.
If text overlays are blurred, or if there are other rend
ering problems, you may need to
enable Advanced Video Rendering. This is done on the MPEG-4 tab in the AMC control
panel applet.
Ensure that your graphics card is using the lates
t device driver. The latest drivers can
usually be downloaded from the manufacturer's web site.
If images are degrading, try decreasing the GOV length, see “Advanced Sett
ings” on page
22
.
Color saturation is different in MPEG-4
and Motion JPEG.
Modify the settings for your graphics adapter. Please see the adapter's documentation
for more information.
The test image does not display as expected.
Image settings. Not all settings have an effect on the test image. For more information, see the help on
Image Settings.
The Power indicator is not constantly lit
Faulty power supply. Check that you are using an AXIS PS-K power supply.
The Status and Network indicator LEDs are flashing red rapidly
Hardware failure. Contact your Axis dealer.
The Status indicator LED is flashing red and the camera is inaccessible
A firmware upgrade has been inter-
rupted or the firmware has otherwise
been damaged.
See the Emergency Recovery Procedure above.
Poor quality snapshot images
Screen incorrectly configured on your
workstation.
In Display Properties, configure your screen to show at least 65000 colors, i.e. at least
16-bit. Using only 16 or 256 colors will produce dithering artifacts in the image.
Browser freezes
Netscape 7.x or Mozilla 1.4 (or later)
can sometimes freeze on a slow com-
puter.
Lower the image resolution.
Problems uploading files
Limited space. There is only limited space available for the upload of your own files. Try deleting one or
more existing files, to free up space.
Missing images in uploads. This can occur when trying to use a larger image buffer than is actually available. Try
lowering the frame rate or the upload period.
Overlay is not displayed
Incorrect size or location of overlay. The overlay may have been positioned incorrectly. Refer to the online help for informa-
tion on the limitations when using image overlays and privacy masks.
Motion Detection triggers unexpectedly
Changes in luminance. Motion detection is based upon changes in luminance in the image. This means that if
there are sudden changes in the lighting, motion detection may be mistakenly triggered.
Lower the sensitivity setting to avoid problems with luminance.
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Axis 210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Axis 210 in the language / languages: English as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info