Manual AVTech - Velleman CAMIP14N (page 7 of 51) (English, German, Dutch, French, Spanish)

621835

Zoom out

Zoom in

1/51

CAMIP14n

V. 02 – 31/03/2014 7 ©Velleman nv

7.5 Port Forwarding

Before you continue, check the internet indicator on the camera.

• If the indicator blinks slowly every 5 seconds, you can proceed with port forwarding.

• If the indicator blinks rapidly, make sure that your router is connected to internet. Then proceed with

port forwarding.

To set up port forwarding, proceed as follows:

1. Open your web browser on your mobile device, and enter the IP address of your router in the

address bar.

Your router configuration page appears.

2. Go to the port forwarding (or virtual server) rule configuration page.

Note: the naming of port forwarding or virtual server may vary based on the brand of your router.

Refer to the user manual of your specific router for more information.

The example below shows the screen for a D-Link router: select the "Advanced" tab and then

choose "Port Forwarding".

3. Enter the camera IP address and port number that you noted down in step 7 of "Configuring the

Network", and enable this rule.

4. Check if the status indicators and on the camera are both on (not blinking).

o If yes, continue with "Checking the Connection".

o If the internet indicator keeps blinking, check the port forwarding settings again.

7.6 Checking the Connection

When you have completed network setup and port forwarding, check your connection setup as follows:

1. On your mobile device, switch your network mode to 3G or connect to a different wireless network

than the one that has your camera connected.

2. Start EagleEyes and select the camera you just added to see if you can access it.

o If yes, your network connection is OK.

o If no, the port number that you are using for the camera may be blocked. Return to step 7 in

"Configuring the Network" to change the port number.

7.7 Set up your camera with WPS

The WPS button allows you to quickly and easily connect the camera to your wireless router if it also has

WPS functionality.

If your wireless router does not have a WPS function, you can set up your network manually. Refer to the

user guide on the included cd-rom or download instructions from from http://www.surveillance-

download.com/user/n812.swf

1. On the back of the camera, press and hold the WPS button. Release when you hear a tone.

2. On your wireless router, press the WPS button within 30 seconds.

Note: The WPS function on your router can be a virtual button on the configuration page, or a

physical button, depending on the brand. Check your router’s documentation for more information.

The camera and wireless router now connect automatically. The connection is successful if you hear a

tone, and if the LAN status indicator on the camera is on (not blinking).

Note: If the connection fails, check if the wireless authentication of your router is WPA or WPA2. If not,

please change the authentication method and try again.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of AVTech - Velleman CAMIP14N in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 2,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

AVTech - Velleman CAMIP14N Manual

Product: