559563

AVM ISDN MultiProtocol Router for Windows 2000 ADSL Manual

106
Zoom out
Zoom in
Previous page
1/134
Next page
NT/MPRI Messages
105 NT/MPRI – 7 Messages
Incoming call to <number dialed> rejected. This CLI <CLI> is not allowed
to dial in.
The security settings specify that all incoming calls should be sub-
jected to a CLI number check. The CLI number received was not found
in the local CLI number database; therefore the call was rejected.
Incoming logical connection to <call destination> (<CLI>) lost (local).
The local site lost the incoming logical connection to the remote site.
Logical connection cleared after inactivity.
The logical ISDN connection was cleared down due to inactivity.
Logical connection to <call destination> lost (local).
The local site lost the outgoing logical connection to the remote site.
Outgoing call to <call destination> (<number>) not possible. Call desti-
nation budget or global thresholds reached.
If the destination-specific budget was reached, the call destination is
blocked for all outgoing connections, including call waiting signals
over the D channel.
If a global threshold was reached, all outgoing connections are locked,
including signaling over the D channel.
To release the lock, enter a higher budget or threshold value.
Outgoing call to <call destination> accepted by remote site, although
cost allocation is set to “Remote Site”.
The outgoing call was accepted by the remote site and charges are be-
ing incurred at the local site. The remote site should have refused the
call and called back in order to bear the connection charges. Make sure
that the CLI transmitted by the local router is registered correctly at the
remote site.
Packet <description> accepted due to rule <no.> from <profile name>.
An IP firewall message indicating that the packet described was ac-
cepted. The filter profile is indicated along with the position of the ap-
plicable rule within the filter.
ntmpri-e.book Seite 105 Donnerstag, 28. Februar 2002 11:26 11
… 106 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN MultiProtocol Router for Windows 2000 ADSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info