559563

AVM ISDN MultiProtocol Router for Windows 2000 ADSL Manual

105
Zoom out
Zoom in
Previous page
1/134
Next page
NT/MPRI Messages
NT/MPRI – 7 Messages 104
Incoming call from <call destination> (<CLI>) rejected. Several calls for
this destination are already being processed.
This message reports that the maximum number of calls which can be
processed simultaneously for one call destination has been reached.
The incoming call is rejected.
Incoming call from <call destination> (<CLI>) rejected. The maximum
number of bundled channels to this call destination is already set up.
This message indicates that no more channels are available for chan-
nel bundling. The configured maximum number of B channels is al-
ready being used for this connection.
Incoming call from <call destination> (<CLI>) rejected. The maximum
number of supported connections has been reached.
This message indicates that no more connections are supported at this
time. The incoming call is rejected.
Incoming call from <CLI> for <number dialed> cannot be accepted. All B
channels in use.
The incoming call could not be accepted because all B channels on the
ISDN-Controller called are already being used for other physical con-
nections.
Incoming call from <CLI> for <number dialed> rejected. All B channels
in use.
The incoming call could not be accepted because all B channels on the
ISDN-Controller called are already being used for other physical con-
nections.
Incoming call from <CLI> for <number dialed> rejected. The
MSN/EAZ/DDI dialed is not configured.
The MSN/EAZ or DDI dialed was not configured for use by the NT/MPRI.
The call may have been intended for another application. As a result,
the incoming call was not accepted.
Incoming call from <CLI> rejected. The local router’s own endpoint dis-
criminator was received.
The local router attempted to set up a connection to itself.
ntmpri-e.book Seite 104 Donnerstag, 28. Februar 2002 11:26 11
… 105 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN MultiProtocol Router for Windows 2000 ADSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info