559563
94
Zoom out
Zoom in
Previous page
1/134
Next page
CAPI 2.0 and Euro-ISDN Messages
93 NT/MPRI – 7 Messages
0x3302 Protocol error, layer 2[#3302]
No connection could be established between the terminal
equipment and the network terminator or local switch. The call
set-up failed at layer 2 of the ISDN protocol: no messages
could be exchanged between the terminal equipment and the
local switch. Possible causes include: the line is not enabled at
the network terminator; an incompatible D-channel protocol
used on the line.
0x3303 Protocol error, layer 3[#3303]
No connection could be established between the terminal
equipment and the network terminator or local switch.
0x3304 Another application got the call[#3304]
This message indicates that another active application re-
ceived the incoming call.
0x3311 Connecting not successful (remote station is not a fax G3 ma-
chine)[#3311]
The remote station called is not a fax machine.
0x3312 Connecting not successful (setting error)[#3312]
Due to internal problems (setting errors) the remote station
called is not ready to receive.
0x3313 Disconnected before transfer (remote station does not sup-
port transfer mode, e.g. wrong resolution)[#3313]
Due to internal problems the remote station called is not ready
to receive.
0x3314 Disconnected during transfer (remote abort)[#3314]
Due to internal problems the remote station called is not ready
to receive.
0x3315 Disconnected during transfer (remote procedure error, e.g. un-
successful repetition of T.30 commands[#3315]
Due to internal problems the remote station called is not ready
to receive.
0x3316 Disconnected during transfer (local tx data underrun)[#3316]
This message indicates internal application errors.
0x3317 Disconnected during transfer (local rx data overflow)[#3317]
Due to internal problems the remote station called is not ready
to receive.
Number Messages/Explanations
ntmpri-e.book Seite 93 Donnerstag, 28. Februar 2002 11:26 11
94


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN MultiProtocol Router for Windows 2000 ADSL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN MultiProtocol Router for Windows 2000 ADSL in the language / languages: English as an attachment in your email.

The manual is 3,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info