559561
18
Zoom out
Zoom in
Previous page
1/55
Next page
18
2 Hardware Installation
3. Remove the back covers of the inserts.
4. Screw the cable onto connector strip X2 on the
terminal board.
See Table 1 in Appendix C, Tables, for the pin
assignments to connect the AVM ISDN-Control-
ler T1/T1-B’s cable to the terminal strip.
5. Connect the cable leads to the correct terminals
on the terminal strip.
6. Replace the cover over the terminals and lock it.
2.3.2 Connection to the NTPMKU or NTPMGF
(NTs with T-shaped Mounting Element)
1. Connect the 9-pin sub-D connector of the cable to
the 9-pin socket of the AVM ISDN-Controller
T1/T1-B (see Fig. 3 in Appendix B, Illustrations).
Secure the connection by tightening the finger
screws. Route the 6 meter cable as directly as
possible to the NT.
2. Unlock and remove the cover of the NTPMKU or
NTPMGF connection terminals.
3. In the NT there is a T-shaped mounting element for
the connecting cable (see Fig. 4 in Appendix B,
Illustrations). Open it to affix the cable by undoing
the screws.
See Table 2 or Table 3, depending on your NT
type, in Appendix C, Tables, for the pin assign-
ments to connect the AVM ISDN-Controller T1/
T1-B’s cable leads to the NTPMKU or NTPMGF
terminals.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller T1-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller T1-B in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller T1-B

AVM ISDN-Controller T1-B User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info