559561
16
Zoom out
Zoom in
Previous page
1/55
Next page
16
2 Hardware Installation
2.2 Connecting the Cable from the PC
Interface Card to the AVM ISDN-
Controller T1/T1-B
After you have installed the PC interface card, it must
be connected to the AVM ISDN-Controller
T1/T1-B.
To prevent interference in the high-frequency link, no
extensions should be added to the cable supplied.
1. Connect the 15-pin sub-D connector of the cable
supplied to the upper socket on the back plate of
the PC interface card (see Fig. 1). Nothing needs
to be connected to the lower socket of the PC
interface card.
2. Connect the 9-pin sub-D connector of the cable to
the 9-pin socket on the ISDN-Controller T1/T1-B
(see Fig. 3).
3. Secure both connectors by tightening the finger
screws.
Now the AVM ISDN-Controller T1/T1-B must be
connected to the ISDN network terminator (NT).
2.3 Connecting the Cable from the ISDN-
Controller T1 to the NT
This section explains how to connect the cable from the
AVM ISDN-Controller T1/T1-B to the ISDN network
terminator (NT) installed by the ISDN provider.
The ISDN operator Deutsche Telekom AG uses various
types of NTs. For this reason, two different connection
procedures are described:
1. Connecting the ISDN-Controller T1 to the NTPM (NT
with terminal board)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM ISDN-Controller T1-B at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM ISDN-Controller T1-B in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM ISDN-Controller T1-B

AVM ISDN-Controller T1-B User Manual - German - 74 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info