722161
7
Zoom out
Zoom in
Previous page
1/38
Next page
9. After the nal con guration step, disconnect the LAN cable from the computer and
connect the FRITZ!Repeater 3000 with your FRITZ!Box (router).
Enable Mesh (Only with FRITZ!Box Software FRITZ!OS 7 or Newer)
1. Make sure that the FRITZ!Repeater 3000 is connected with your FRITZ!Box (router) via
LAN cable. The LED for connection quality lights up green.
2. Press the “Connect” button. The “Connect” LED ashes.
3. Within 2 minutes, enable Mesh on your FRITZ!Box:
- FRITZ!Box with “WPS" or “Connect/WPS” button: Press button brie y.
- FRITZ!Box with “WLAN” or “WLAN/WPS” button: Press button for at least 6 seconds
When Mesh is enabled, the FRITZ!Repeater is marked with the
Mesh enabled symbol
under “Home Network / Mesh” in the user interface of the FRITZ!Box The FRITZ!Repeater
3000 adopts all of its wireless LAN settings from the FRITZ!Box, including the wireless
network name (SSID) and network key.
More detailed information about the bene ts and the con guration of Mesh is
presented in the PDF manual and at en.avm.de/mesh-networking.
FRITZ!Repeater 3000 in the Home Network
FRITZ!Repeater 3000 on a FRITZ!Box with Mesh
In the home network of a FRITZ!Box with Mesh (FRITZ!OS 7 or higher), operation of your
FRITZ!Repeater 3000 is especially easy and convenient.
When Mesh is enabled, all of the FRITZ!Box’s wireless LAN settings are permanently
adopted.
Updates for the FRITZ!Repeater 3000 can be performed directly in the FRITZ!Box user
interface under “Home Network / Mesh”.
Mesh WiFi provides for the optimum wireless connections of all wireless devices.
During con guration at the press of a button (see from pageSeite 8), the
FRITZ!Repeater 3000 is automatically enabled for Mesh. When “LAN bridge”
access mode is con gured, Mesh has to be enabled; see page Seite 12.
FRITZ!Repeater 3000 on a FRITZ!Box without Mesh or a Wireless Router
from Another Manufacturer
During con guration the FRITZ!Repeater 3000 adopts the wireless network name and
password of the FRITZ!Box (wireless router).
If the wireless network name and/or password is changed in the FRITZ!Box (wireless
router), the Repeater has to be reconnected.
Settings and updates for the FRITZ!Repeater 3000 are con gured and performed via
the FRITZ!Repeater user interface.
Opening the User Interface of the FRITZ!Repeater 3000
With a FRITZ!Box:
Enter
http://fritz.repeater in the web browser on a connected device to open the user
interface of the FRITZ!Repeater 3000. Perform any update available under “System /
Update”.
With another wireless router:
1. Open the user interface of the your wireless router to determine the IP address
assigned to the FRITZ!Repeater 3000.
2. Then enter the IP address in the address bar of a new web browser window to open
the FRITZ!Repeater 3000 user interface.
3. Secure your FRITZ!Repeater 3000 with a password the rst time you open the user
interface.
4. Perform any update available under “System / Update”.
1312
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for AVM Fritz Repeater 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of AVM Fritz Repeater 3000 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 4,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of AVM Fritz Repeater 3000

AVM Fritz Repeater 3000 Usermanual and installation guide - German - 97 pages

AVM Fritz Repeater 3000 Usermanual and installation guide - Dutch - 97 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info