651056
51
Zoom out
Zoom in
Previous page
1/176
Next page
51
During the start-up of the wine cellar or after an electrical power cut-off, the control system is set by a
calibration process. During this process, the display and the selection buttons are lit and the alert pictogram
(triangle with exclamation point) blinks.
The process can take from 10 to 60 seconds. When the process is terminated, the display and buttons
return to normal.
The temperature inside the wine cellar is automatically controlled by the electronic control system (figure 1)
The system is preset in the factory and operates automatically. The basic parameters were defined for an
average central area temperature of 12°C (+/- 2°C). If you change the settings, the last selection will be
kept in memory.
TEMPERATURE SELECTION
If a new setting or an adaptation of the preservation temperature is considered to be necessary:
Press the SET key « » during 3 seconds to enter into the main menu.
The possible settings are: temperature setting, winter system temperature setting, high temperature
alarm setting.
The different possible settings will be automatically displayed after some seconds in a sequential mode,
or you can select one by pressing successively the SET key “ » until the selected function.
According to your model the below screen is displayed :
Press the UP and DOWN keys « » to select the temperature requested, and press the SET key
» to validate your choice, or wait a few secondes and you will be back into the main menu. When the
setting is selected, the temperature is in a blinking mode, and then you can adjust it.
To decrease the temperature :
Press the DOWN key » to decrease the temperature degree to degree.
Validate your selection by pressing the SET key « »
To increase the temperature :
Press the UP key « » to increase the temperature degree to degree.
Validate your selection by pressing the SET key « »
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avintage DVA265PA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avintage DVA265PA in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 6,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info