764763
6
Zoom out
Zoom in
Previous page
1/18
Next page
EN
10 11
3.3. Assembling
1) Unfold the inatable spa over the
base protector.
2) Bring the pump unit to the inatable
spa.
3) Connect the ination hose to the
pump on the socket .
6) Inate the inatable spa for about
10 minutes. Ensure that the spa is
rmly inated.
9) Put the lter cartridge in the support
then screw it onto the lower suction
inside the basin.
7) Remove the ination hose and
screw the cap rmly in place.
10) Ensure that the drain caps are
properly closed before before lling
the spa
8) Connect the unit pump to the pool
using the 3 connectors to screw.
Ensure the icons on the pump and the
pool match up
11) Fill the spa with 10 cm of water. 12) Smooth wrinkles out of the bottom
of the spa, then ll the spa to the level
indicated. Your spa is ready.
4) Insert the ination hose into the
inatable spa
5) Connect the pump unit then press
the button to inate the spa.
The air ow valve prevents your spa
from over-inating.
Warling : Do not leave spa unattended while lling with water.
Make sure the drain tting is plugged securely and the cap is in place. Start lling the spa with water. After
about 1-inch of water is on the bottom, stop lling and smooth wrinkles out of the bottom of the spa. Pull
the outer wall out from the top edge, all around the bottom of the spa, so that it lls evently.
Continue lling the spa until waterf level.
The number of persons required for installation: 1 adult at least.
10 minutes for site preparation and water lling.
Once powered-up, the LED displays the current water temperature automatically.
The temperature units selector changes the temperature units from Celsius de-
grees to Fahrenheit degrees.
Press the temperature adjustment buttons, then the screen will ash. When it is
ashing, you can set the desired temperature. The value will increase or decrease
1 degree at once. The temperature could be set between 30°C to 42°C (86°F to
107°F).
To lock or unlock the control panel, press the Lock button and hold 3 seconds.
Lock the control panel when you are away to prevent other people come to
change your settings..
Press the massage button to activate the bubble massage system, the green
indicator light turns on. It can be turned off by pressing it again.
Note :
- The massage system will stop automatically after 30 minutes of operation. Re-activate the mas-
sage function by pressing the massage button again.
- When lter button is on, pressing bubble button will exchange lter mode into massage mode: lter
indicator light will turn off and massage indicator light turn on. If press the bubble button again, the
massage mode will be changed back to lter mode.
4. USAGE
4.1. Control panel
4.2. Functions
Filtration
Temperature
Decrease Button
Temperature
Increase Button
LED Display
Massage Button
Lock Button Temperature
units indicator
Temperature
units
selector
Heat Button
6


Need help? Post your question in this forum.

Forumrules
1

Forum

avenli-spa-london

Reset search

  • Spa won’t turn on to pump air into new spa. Error code e3 appears Submitted on 17-2-2024 at 00:12

    Reply Report abuse
  • E4 error message when trying to inflate for first time, London spa!! Submitted on 21-4-2022 at 00:03

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avenli Spa London at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avenli Spa London in the language / languages: English as an attachment in your email.

The manual is 6,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avenli Spa London

Avenli Spa London User Manual - German - 9 pages

Avenli Spa London Usermanual and installation guide - Dutch - 9 pages

Avenli Spa London User Manual - Polish, Swedish, Norwegian - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info