629224
9
Zoom out
Zoom in
Previous page
1/13
Next page
Avaya E129 SIP Deskphone Release 1.25.1.1 Readme
External ID
Internal ID
Issue Description and possible workaround if any
Rapid-111
When the primary SM is put in “Deny Service” mode
(for maintenance purposes, etc.), E129 phones will
not detect that as a reason to initiate fail over to the
secondary SM, and hence outgoing calls made by the
E129 phones will fail. Incoming calls will be correctly
treated (by the secondary SM), and since E129
phones do register also to the secondary SM, these
calls will be properly routed to them as well, so
incoming calls will continue to work for E129 phones.
Workaround: block port 5060 (for TCP) or 5061 (for
TLS) on the SM in “Deny Service” mode. After 40-60
seconds, all E129 phones should failover to the
secondary SM.
User Interface
Rapid-772
Changing the phone language to an already installed
phone will result in loss of handset functionality.
Speaker and headset will continue working fine.
Workaround: logout the user and re-login to recover.
An alternative workaround is to reset the device after
the change.
Rapid-744
Secured RTP icon on phone display will be set to off
after holding and resuming a SRTP call. This is even
though the resumed call is using SRTP.
Rapid-743
User starts a call in headset mode and move to
speaker mode w/o on hooking the handset. If in that
state the user will start transferring a call and before
completing the transfer action he will on hook the
transfer action will be aborted (returned to the original
call).
Workaround: resume the original held call and start
the transfer again w/o changing the audio source
Administration
Rapid-767
E129 that was loaded with an earlier release prior to
upgrading to load 1.25.1.1 will fail to receive calls
when using TLS in demo mode.
Workaround: Download your own generated private
key and certificate to the device as recommended. If
you wish to work with the default private key and
certificate either restore the device to factory reset or
connect via SSH, enter config mode and use the
unset 280 command.
Rapid-705
Downloading multiple custom ringtone will download
only the first ringtone (ring1.bin)
Workaround: Download only one ringtone at a time.
Replace the ring tone on the server with the next one
after downloading the previous one.
Copyright Avaya 2014 All rights reserved
Issued 7 April 2014 Page 9 of 13
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avaya E129 SIP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avaya E129 SIP in the language / languages: English as an attachment in your email.

The manual is 0,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avaya E129 SIP

Avaya E129 SIP Installation Guide - English - 41 pages

Avaya E129 SIP User Manual - English - 93 pages

Avaya E129 SIP User Manual - English - 44 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info