6147

Avaya 4610 Manual

59
Zoom out
Zoom in
Previous page
1/64
Next page
Troubleshooting Chart Management and Troubleshooting - Page 59
IP Office 4610 User’s Guide Management and Troubleshooting - Page 59
40DHB0002USFA – Issue 1 (9th February 2005) Troubleshooting Chart
Problem/Symptom Suggested Solution
Characters do not appear on the
display screen.
See " Phone does not activate when connected for the first time"
above.
Check all lines into the phone to be sure it is properly connected.
Check the power source to be sure your telephone is receiving
power.
Perform the following Test procedure: with the telephone idle (on-
hook), press and release the
Mute button, then press the
following numbers on the dial pad: 8 3 7 8 # (which stands for
TEST). The display should indicate the self-test has started, then
report if the test was successful or failed. If nothing appears on the
display, and the phone is receiving power, your phone may need to
be replaced.
If the above suggested solutions do not resolve the problem, reset or
power cycle the phone with your System Administrator’s assistance.
No dial tone. Make sure both the handset and line cords into the phone are
securely connected. Note that there may be a slight operational
delay if you unplug and reconnect the phone.
Contact your System Administrator if the problem persists.
Phone does not ring
Set your ringer volume to a higher level using the
and
Up/Down Volume keys.
From another phone, place a call to your extension to test the above
suggested solution.
All other IP problems Contact your System Administrator.
SPEED DIAL APPLICATION:
You cannot dial out using any
Speed Dial entries.
You cannot add an entry to the
Speed Dial list
Dial button. Check that all call appearances (incoming/outgoing
lines) are not already in use. If all lines are in use, wait until a line is
available to make your call.
You have 108 Speed Dial entries, the maximum allowed. You must
delete at least one entry before adding a new entry.
CALL LOG APPLICATION:
You cannot dial out after
selecting a call log entry.
You cannot add an entry to the
Speed Dial list.
Dialing from this application
does not go through.
Check that all call appearances incoming/outgoing lines) are not
already in use. If all lines are in use, wait until a line is available to
make your call.
You have 108 Speed Dial entries, the maximum allowed. You must
delete at least one entry before adding a new entry.
Your administrator must administer settings for the Enhanced
Dialing feature beyond the defaults.
OPTIONS:
No Options other than “View IP
Settings” display
Your administrator has turned off all user-settable options.
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Avaya 4610 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Avaya 4610 in the language / languages: English as an attachment in your email.

The manual is 1,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Avaya 4610

Avaya 4610 User Manual - English - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info