701393
11
Zoom out
Zoom in
Previous page
1/32
Next page
11
FIGURES (P. 28-31)
CONNECTIONS AND CONTROLLERS (FIG. 1)
(1) PROTECT-LED and POWER-LED
(2) Input Sensitivity Switch
(3) Gain level controller
(4) SubSonicltercontroller
(5) Audio signal inputs
(6) Audiosignaloutputsforadditionalampliers
(7) LowPassltercontroller
(8) BASS EQ controller
(9) Connector for the included bass level remote controller
(10) PHASE controller
POWER SUPPLY AND TURN ON CONNECTION (FIG. 2)
(1) GND terminal for the ground
(2) REM terminal for the turn on connection
(3) +12 V terminal for the positive-connection of the battery
(4) Vehicle’s battery
(5) In-Line Fuse (not included in the scope of delivery)
(6) Turn on wire from the head unit or the electrical antenna
(7) Fuse(s)
(8) MASTER/SLAVE switch
(9) Connector for the included MASTER/SLAVE DATA LINK cable
1-CHANNEL OPERATION MONO 2 SUBWOOFERS (FIG. 4)
Ifyouwanttoruntheamplierwiththe2lineoutputchannelsfromtheheadunittodrivetwosubwoofers,con-
nect the following setup:
(1) To the head unit, line output left or subwoofer output
(2) To the head unit, line output right or subwoofer output
(3) Bass level remote controller
(4) Subwoofer1(2-8Ω)
(5) Subwoofer2(2-8Ω)
1-CHANNEL OPERATION MONO 1 SUBWOOFER (FIG. 3)
Ifyouwanttoruntheamplierwiththe2lineoutputchannelsfromtheheadunittodriveasubwoofer,connect
the following setup:
(1) To the head unit, line output left or subwoofer output
(2) To the head unit, line output right or subwoofer output
(3) Bass level remote controller
(4) Subwoofer(1-8Ω)
MASTER/SLAVE OPERATION WITH TWO TA1800 (FIG. 5a-5c)
Ifyouwanttorunamplier1withthe2lineoutputchannelsfromtheheadunitandamplier2shouldbecon-
trolled via BRIDGE MODE (Fig. 2,9), connect the following setup:
(1) To the head unit, line output left
(2) To the head unit, line output right
(3) Bass remote control to adjust the bass level out of the driver’s seat
Note:SettheswitchBRIDGEDMODE(Fig.2,8)onamplier1toposition“MASTER”andonamplier2to
position “SLAVE”.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autotek TA1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autotek TA1800 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info