Manual Autotek TA1800 (page 10 of 32) (English, German, French, Italian, Spanish)

701393

Zoom out

Zoom in

1/32

INPUT SENSITIVITY

OPERATING ELEMENTS

TurntheGAINcontroller(Fig.1,3)oftheampliertotheMINposition.Thenturnthevolumecontrollerofthe

head unit to 80 - 90% of its full setting. Now turn GAIN clockwise until you hear some distortion. Then turn back

the GAIN (Fig. 1,3) slightly until you hear a cleaner sound.

The “Input Sensitivity” (Fig. 1.2) switch allows to set the input sensitivity from “0.2V - 2V” to “2V - 8V”.´

VARIABLE SUBSONIC FILTER

WiththeSUBSONICcontroller(Fig.1,4)youcanadjustthelowercross-overfrequency,tolterouttheverylow

frequencies to relieve the subwoofer or to generate a bandpass signal. If you don’t want to use this function,

turn the controller (Fig. 1,4) to the very left to the 20 Hz position.

NOTE: The adjusted value of the SUBSONIC (Fig. 1,4) should not be higher than the adjusted value of the LPF

controller (Fig. 1,7). Otherwise no sound will be audible.

VARIABLE LOW PASS FILTER

Set the desired cross-over frequency by using the controller LPF (Fig. 1,7). Thus to that only the frequencies

belowthechosencross-overfrequencywillbeampliedandthesubwooferplaysmorepreciselyandefcient.

BASS LEVEL REMOTE CONTROLLER

MASTER/SLAVE OPERATION

With the included bass level cable remote controller you are able to adjust the bass level e.g. out of the driver’s

seat.

TheMaster/SlaveOperationallowstolinktwoidenticalTA1800ampliers.Theadvantageofthisfunctionis,

thatthecrossoversectionofamplier2willbebypassedandforbothampliersthesamecrossoversettings

comeintooperation,whichcanbeadjustedontheamplier1.Thenbothampliersworktogetherasonebig

monoblock. Please refer to section ”MASTER/SLAVE OPERATION WITH TWO TA1800” on page 12 and the

gures5ato5contheverylastpage.

VARIABLE BASS EQ

With the BASS EQ controller (Fig. 1,8) you are able to adjust the bass level from 0 - 18 dB.

Attention: Use the BASS EQ wisely!

PROTECTION CIRCUIT

TheOperation-LED(POWER,g.1,1)litsup,iftheamplierisinoperation.

TheprotectionLED(PROTECT,g.1,1)litsup,whentheamplierisoverheated,orashortcircuitoccurs

resp. a too low impedance load is connected to the speaker outputs. If this events, the internal built-in protec-

tioncircuitshutsdowntheamplierautomatically.Theampliershouldworkagainproperlyafteryouhave

solved the problems.

VARIABLE PHASE

The PHASE controller (Fig. 1,10) allows to set the phase between 0°and 180° to match the run time of the

output signal with the vehicle’s interior acoustic.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Autotek TA1800 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4,49 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Autotek TA1800 Manual

Product: