558054
19
Zoom out
Zoom in
Previous page
1/48
Next page
Operators Manual 15
A FRESH APPROACH TO VENDING
Section 5 - Service Keypad Functions
Your machine is fitted with a service keypad mounted on the rear of
the door. This keypad contains the Operators Program entry key
and also allows the operator to carry out specific functions during
routine cleaning and maintenance.
N.B. During certain operations e.g. View Counters it is necessary
for the operator to utilise the LCD mounted on the front of the door
to access data.
The service keypad allows the operator to carry out the following
functions:
5.1 Button 1 - Program Entry
This button enables the operator to access the Operators Program.
5.2 Button 2 - Brewer Open (Freshbrew Models Only)
This button operates the brewer fitted to freshbrew machines and enables the operator to replace
the filter paper used in paper type brewers or remove the brewer chambers/wipe arms assembly of
paperless brewers for cleaning purposes.
5.3 Button 3 - Rinse/Flush
1. The flush sequence operates automatically and rinses the mixing bowls. Before the
sequence begins, the system waits until the water in the boiler is at the correct
temperature determined by the thermistor.
2. In order to guarantee the highest standards of cleanliness, the boiler fill valve is
disabled, ensuring that the water used in the sequence is delivered at the optimum
temperature to kill any micro-organisms.
3. Each hot water valve and the corresponding whipper is switched on in sequence for a
pre-set flush time. Once the flush cycle is complete the machine returns to standby
mode, ready to vend.
4. To flush the machine:
a. Open the front door of the machine.
Caution: Ensure that a suitable container is placed under the dispense position. Keep
hands away from the dispense area whilst the flushing cycle is in operation.
b. Press and release the Flush button (3). The flush sequence begins.
c. Empty the waste water container when complete.
5.4 Button 4 - Brewer Clean (Freshbrew Models Only)
1. The brewer clean button enables the brewer to be cleaned independently. In order to
guarantee the highest standards of cleanliness, the boiler fill valve is disabled, ensuring
that the water used is delivered at the optimum temperature to kill any micro-
organisms.
2. The brewer unit is filled with hot water and then operated through four complete brew
cycles.
3. Once the cleaning cycle is complete, the boiler refills and when the water is at the
Section 5 - Service Keypad Functions
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Autobar Infinity at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Autobar Infinity in the language / languages: English as an attachment in your email.

The manual is 1,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Autobar Infinity

Autobar Infinity Installation Guide - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info